Isopon Alloy Wheel Filler - 100ml

Check the product packaging for the specific expiration date. The shelf life can vary, so always check before use.

While primarily designed for alloy wheels, it may be used on steel wheels. However, always test on a small, inconspicuous area first.

Yes, it is essential to prime the repaired area before painting to ensure proper paint adhesion and protection.

Use a paint specifically designed for alloy wheels. Consider using a matching paint available at auto parts stores for best results.

Curing time varies depending on the product and environmental conditions. Follow the manufacturer's instructions on the packaging for specific cure times, typically in the range of 15-30 minutes.

It is best to apply the filler in a moderate temperature environment. Extreme temperatures can affect the curing time and overall performance. If working in cold conditions, allow more curing time.

Wear gloves and eye protection when working with the filler and hardener. Ensure adequate ventilation. Avoid contact with skin and eyes. Follow all safety guidelines provided on the product packaging.

Ensure the correct ratio of filler and hardener was used. Check the expiration date. The product may be too old.

Apply the filler in layers, allowing each layer to cure before applying the next. Avoid overfilling in one go.

Use appropriate grit sandpaper. Start with a coarser grit and gradually move to finer grits for a smooth finish.

Ensure the surface is thoroughly cleaned and degreased before application. Scuff the surface for better adhesion.

Mix the filler and hardener slowly to avoid introducing air bubbles. Apply in thin layers.