Best current price£2.66from eBay
Shopping.co.uk recommended and popular offers
eBay£2.66Visit shop Vallejo Game Color 18ml - Polyurethane Satin Varnish - 72.652
Visit shopeBay£3.54Visit shop Vallejo Polyurethane Satin Varnish - 18ml Clear Protective Sealer Coat Miniature
Visit shop6 offers from £2.66 - £4.64
View price history by clicking the chart icon.
This guide is for scale model enthusiasts aged 14 and over who are looking to achieve a satin finish on their models. The Vallejo Polyurethane Satin Varnish provides a durable, protective layer, enhancing the appearance of your creations. However, it's important to note that proper preparation and application techniques are crucial for optimal results. This guide will walk you through the key features, best practices, and troubleshooting tips to help you get the most out of your Vallejo varnish.
| Colour | White |
|---|---|
| Model Part Number | 72652 |
| Brand | Vallejo |
Follow the manufacturer's instructions for thinning. Use a suitable thinner, typically a thinner designed for acrylic paints.
Yes, but make sure to prime the metal surface first to ensure proper adhesion.
Apply thin coats until you achieve the desired finish. Usually, two to three coats are sufficient.
Drying times vary depending on environmental conditions, but generally, allow at least 24 hours for the varnish to fully cure.
Immediately clean your airbrush with appropriate cleaner. Make sure the varnish is properly thinned and that the airbrush is clean before starting the application.
Unopened, the varnish should last for several years if stored properly. Once opened, it may start to thicken over time. Follow the instructions for the best results.
Yes, but test on a small, inconspicuous area first to ensure compatibility.
This may indicate excessive humidity during application. Try applying in a less humid environment. Ensure that the surface is completely dry before applying the varnish.
Ensure that the ambient temperature is suitable for drying. Avoid applying too thick a coat. The issue may also be due to humidity. Increase ventilation and try a thin coat.
This is often due to applying too much varnish at once. Apply in thin, even coats, and allow each coat to dry before applying the next one.
Clean the airbrush thoroughly after each use with appropriate cleaner. Thin the varnish if necessary.
