JG Speedfit Reducing Pipe Tee - White - 22mm X 15mm X 15mm

No, the JG Speedfit Reducing Pipe Tee is designed for tool-free installation. You only need to push the pipe in and twist the nut by hand.

You can use copper pipe, or plastic pipes such as JG Speedfit PEX and polybutylene, provided you use the appropriate pipe inserts for the plastic pipes.

Yes, the fitting is made from non-toxic materials and is suitable for hot and cold water systems, including potable water.

To demount, simply unlock the plastic nut by hand, push the collet towards the body of the fitting, and pull the pipe to release.

The main advantage is the significant reduction in installation time (up to 40%) and the elimination of the need for hot works, making installation faster, safer, and easier, especially in confined spaces.

No, pipe inserts are only required for plastic pipes (like PEX or polybutylene) to maintain their shape and ensure a secure seal. They are not needed for copper pipe.

The main O-ring seal provides a watertight seal between the pipe and the fitting. The Grip and Seal collet, with its stainless steel teeth, ensures the pipe remains securely gripped.

Ensure the pipe was pushed in fully until it stopped. Check that the pipe end is clean, square, and free from damage. Verify that the correct pipe insert was used for plastic pipes. Inspect the O-ring seal for damage.

Check for obstructions inside the pipe or fitting. Ensure the pipe is round and not deformed. For plastic pipes, confirm the correct size insert is being used.

Ensure the pipe is fully inserted. Check that the collet is not obstructed. Lightly lubricate the O-ring with water if the pipe seems stiff to insert, but do not use oils or greases.

Ensure the collet is pushed fully towards the body of the fitting while simultaneously pulling the pipe outwards. If resistance is met, do not force; re-seat the pipe and attempt demounting again.