Stormsure Drysuit Sock Replacement Kit - Marine-Grade, Waterproof Repair Solution

For optimal results, allow the repair to cure for at least 24 hours in a dry environment before putting the drysuit back into use. Avoid stretching or stressing the bond during this period.

The Stormoprene adhesive is suitable for various materials, including neoprene. However, always test on an inconspicuous area first if possible to ensure compatibility.

The 90g tube of Stormoprene Contact Adhesive covers approximately 300 cm² at a 3 mm thickness. This is suitable for repairing individual sock seals or similar-sized areas.

The latex socks are supplied in a large size and are designed to be trimmed by the user to achieve a precise fit before applying the adhesive.

Unopened, the adhesive typically has a shelf life of 12-24 months. Once opened, it is best used within 6 months, stored in a cool, dry place.

Yes, the Stormsure Stormoprene adhesive is a versatile, marine-grade contact adhesive suitable for repairing wetsuits, boots, bags, and other flexible waterproof gear.

Ensure both surfaces were clean, dry, and completely free of contaminants before application. Reapply the adhesive, ensuring the correct tackiness stage has been reached before joining surfaces. Verify the adhesive has not expired.

The repair may not have been fully cured or had sufficient pressure applied. Clean the area, remove old adhesive if possible, and reapply, ensuring proper tackiness, firm pressure, and a full 24-hour cure time.

The included latex socks are large. You may need to carefully trim them to achieve a perfect fit before applying adhesive. For a loose fit, ensure the adhesive application is generous and creates a snug bond.

Ensure the adhesive is at a suitable room temperature. If it is too cold, it can become thick. Warming the tube slightly in your hands may help. Apply in thin layers; multiple thin layers are better than one thick layer.