Crown Non-Drip Gloss Paint - White - 750ml

This paint is suitable for both interior and exterior wood and metal surfaces, including doors, skirting boards, and furniture.

Typically, two coats are recommended for optimal coverage and finish, but the number of coats may vary depending on the surface and the original color.

Drying time varies depending on environmental conditions but typically takes 6-8 hours for touch dry, and a full 24 hours to fully dry. Recoat after 16 hours.

No, this paint is specifically designed for wood and metal surfaces. Using it on plastic may result in poor adhesion and an unsatisfactory finish.

Clean brushes immediately after use with the appropriate solvent, typically white spirit, following the manufacturer's instructions.

Store leftover paint in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the lid is securely sealed to prevent the paint from drying out.

Priming is recommended, particularly for bare wood or metal surfaces, to improve adhesion and ensure a more uniform finish. Use a primer suitable for the surface you are painting.

Coverage can vary, but typically, a 750ml tin will cover approximately 8-10 square meters, depending on the surface and application method.

Ensure you are applying thin, even coats. Avoid overloading the brush or roller. If necessary, lightly sand the affected areas after they have dried and reapply a new coat.

Check the room temperature and humidity levels. Ensure adequate ventilation. Allow additional drying time, as humidity and low temperatures can slow down the drying process.

Ensure the surface is properly primed. Apply multiple thin coats, allowing each coat to dry completely before applying the next.

Use a high-quality brush or roller designed for gloss paint. Apply the paint evenly and avoid overworking the surface.