Setup, Compatibility & Care
Setup Instructions:
- Shake the aerosol can thoroughly before use.
- Start the vehicle and turn the air conditioning system to its full power on the re-circulate mode.
- Open all dashboard vents to allow for maximum air circulation.
- Ensure all vehicle windows are shut completely.
- Move the front passenger seat forward as far as possible and tilt its backrest forward.
- Prepare the Kleen Air box: push out the circular perforation and use it to keep the aerosol upright.
- Place the upright product in the rear foot well, ensuring the finger tab points towards the center of the vehicle.
- Activate the product: Depress the locking valve until it securely stays in place. *Ensure your eyes and face are not directly above the product during activation.*
- Exit the vehicle immediately, ensuring all doors are closed.
- Wait approximately 10 minutes for the product to fully discharge and circulate.
- After 10 minutes, re-enter the vehicle, remove the empty product can from the foot well, and wipe any excess moisture from the back of the passenger seat and interior windows with a clean cloth. The moisture is harmless.
Compatibility:
This product is designed for use in standard automotive air conditioning systems. It is suitable for most car makes and models.
Care:
While the product itself does not require ongoing care, regular maintenance of your car's air conditioning system, such as replacing cabin filters, is recommended for optimal performance.