Metsä Wood - Smooth Planed Whitewood Spruce Stick Timber - 2.4M - 94mm - 44mm

While this timber is treated, for direct ground contact or prolonged exposure to high moisture, additional protective measures such as a damp-proof course, a ground contact-rated wood preserver, or a gravel barrier are recommended to further extend its lifespan.

Yes, its smooth, planed surface is an excellent base for painting, staining, or varnishing. This allows you to customize its appearance and provide an additional layer of protection.

PSE stands for Planed Square Edge. It means the timber has been machined on all four sides to achieve a smooth finish and consistent, precise dimensions, making it easier to work with.

Standard woodworking tools such as hand saws or circular saws for cutting, drills for pilot holes, and a tape measure will be sufficient for most projects.

No, this timber is specifically designed for non-structural applications. It should not be used for load-bearing elements in construction.

Store timber flat, off the ground, in a dry, well-ventilated area, protected from direct sunlight and rain. This prevents warping, twisting, and moisture absorption, preserving its quality for future use.

Info needed: [Kiln drying status of Metsä Wood Spruce Stick Timber]

Ensure timber is properly acclimatized to the project environment before use. Use appropriate fixings at adequate intervals to secure the timber firmly. Store any unused timber flat and in a dry condition.

Use a sharp, appropriate saw blade (e.g., a fine-tooth blade for cleaner cuts on planed timber). Ensure the timber is securely clamped or held during cutting to prevent movement.

Pre-drill pilot holes, especially when fastening near the ends or edges of the timber. Use screws designed for timber that reduce splitting, or nails with appropriate gauges.

Ensure the timber surface is clean, dry, and free of dust or debris before applying any finish. For best results, light sanding between coats can help achieve a smoother, more even finish.