PRO Carbon Saddle Rail Clamps - Single Bolt Sprung Clamp
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
These PRO Carbon Saddle Rail Clamps are designed for cyclists with oval carbon rail saddles, offering a secure and reliable single-bolt clamping solution. They are specifically suited for 8 x 9 mm rails, providing a strong connection. A potential consideration is their single-bolt design, which requires precise torque for optimal performance, especially with carbon rails.
All features
| Model Part Number | PRSSP0106 |
|---|---|
| Brand | PRO |
Extended Product Information
FAQs
What type of saddle rails are these clamps designed for?
These clamps are specifically designed for 8 x 9 mm oval carbon saddle rails.
Can I use these with round metal saddle rails?
No, these clamps are optimized for oval carbon rails and may not provide a secure or correct fit for round metal rails.
What is the advantage of a single-bolt design?
A single-bolt design offers a simpler installation and a cleaner, more minimalist appearance. It requires precise torque application for optimal security.
What torque should I use to tighten the bolt?
For carbon rails, it is typically recommended to use a torque between 5-7 Nm. Always refer to the specific guidelines provided by your saddle and seatpost manufacturers.
How often should I check the torque on the clamp bolt?
It's advisable to check the torque after the initial installation and then periodically, especially after long rides or significant temperature fluctuations, to ensure continued security.
Are these clamps compatible with all seatposts?
While designed by PRO, their compatibility depends on the seatpost head's design. Ensure your seatpost head accepts this style of clamp before purchase.
Troubleshooting
Saddle slips after installation
Verify that the saddle rails are clean and free of grease. Ensure the bolt is tightened to the correct torque specification. Check for any wear on the clamp surfaces or saddle rails.
Difficulty fitting saddle rails
Confirm that your saddle rails are indeed 8 x 9 mm oval carbon rails. Ensure the clamp is fully opened and that no debris is obstructing the rail seating area.
Clamp bolt won't tighten or feels stripped
Inspect the bolt and the threaded insert for damage. If damaged, the clamp or bolt may need replacement. Do not overtighten.
Creaking noise from the seatpost area
Apply a thin layer of carbon assembly paste to the saddle rails and inside the clamp where they make contact. Re-torque the bolt to the specified value.
Pros and Cons
Pros
- Specifically designed for compatibility with popular oval carbon saddle rails.
- Durable construction with forged 6061 aluminum.
- Simple, single-bolt installation process.
- Provides a secure connection to prevent saddle movement.
- Lightweight yet robust.
Cons
- Single-bolt design may require more attention to torque settings than dual-bolt systems.
- Best suited for specific 8 x 9 mm oval rail dimensions; may not fit other sizes.
- Requires compatible PRO seatpost for optimal fit.
- Not ideal for riders who frequently adjust saddle height or angle.
Setup, Compatibility & Care
Setup:
- Ensure your saddle rails are the compatible 8 x 9 mm oval carbon type.
- Loosen the single bolt on the clamp.
- Carefully position the saddle rails within the clamp.
- Tighten the bolt gradually, ensuring even pressure on both sides of the rail. Use a torque wrench to adhere to the recommended torque specification for your seatpost and saddle rails (typically 5-7 Nm for carbon rails, but always consult manufacturer guidelines).
Compatibility:
- These clamps are ideally suited for use with 8 x 9 mm oval carbon saddle rails.
- Designed to work with compatible PRO seatposts. Always check your seatpost’s specifications for clamp head compatibility.
Care:
- Clean the clamps periodically with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Inspect the bolt and clamp threads for wear or damage regularly.
- Ensure the torque setting is maintained; re-torque if necessary, especially after initial installation or significant temperature changes.