McAlpine Universal Slip Through Straight Connector - 2" Slip
The McAlpine 2" Universal Slip Through Straight Connector is designed for seamless plumbing applic...The McAlpine 2" Universal Slip Through Straight Connector is designed for seamless plumbing applications. This connector features a slip-through design that allows for easy installation without a pipe stop, making it versatile for various plumbing needs.
Key Features:
- Easy Installation: The slip-through design simplifies the connection process.
- Universal Fit: Compatible with standard 2" pipes for versatile use.
- Durable Construction: Made from high-quality materials for long-lasting performance.
- No Pipe Stop: Allows for flexible installation options without restrictions.
- Ideal for Plumbing: Perfect for both DIY projects and professional plumbing applications.
Weight: 0.2425084882 pounds
Manufacturer: McAlpine
The McAlpine 2" Universal Slip Through Straight Connector is designed for plumbers and DIY enthusiasts seeking a straightforward solution for connecting 2" pipes. Its key benefit lies in its easy slip-through installation, which simplifies the process by not requiring a pipe stop, offering greater flexibility. A potential caveat to consider is its specific 2" slip fit, which limits its compatibility to pipes of that exact size.
All features
Model Part Number
Z28M-SLIP
Brand
McAlpine
Extended Product Information
FAQs
What is the primary advantage of the 'slip-through' design?
The slip-through design allows the connector to slide over the pipe, simplifying alignment and installation by not requiring a pipe stop. This can speed up the process and offer more flexibility.
Can this connector be used with pipes other than 2"?
No, this connector is specifically designed for standard 2" nominal diameter pipes. Using it with other sizes may result in an improper fit and leaks.
What type of pipes is this connector compatible with?
It is designed to be compatible with standard 2" pipes made of common plumbing materials such as PVC, ABS, and potentially others, depending on the specific solvent cement or sealant used.
Do I need a pipe stop with this connector?
No, the slip-through design eliminates the need for a pipe stop, offering greater installation flexibility.
How should I ensure a watertight seal?
A watertight seal is typically achieved by applying the appropriate solvent cement or sealant to the pipe ends and the inside of the connector before sliding it into place. Always follow the manufacturer's instructions for the chosen adhesive or sealant and local plumbing codes.
What is the weight of this connector?
The connector weighs approximately 0.2425084882 pounds.
Troubleshooting
Connector does not slide easily onto the pipe.
Ensure the pipe end is clean and free of burrs. Lightly chamfer the pipe edge if necessary. Check that you are using a 2" pipe as intended.
Leak detected at the connection point.
Disassemble the connection and reapply appropriate solvent cement or sealant. Ensure the pipes and connector are clean and dry before reassembly. Verify that the connector is fully slid into position over the joint.
Pipe does not seat fully within the connector.
Confirm that the pipe is not obstructed internally and that the connector is properly aligned. Ensure you are using standard 2" pipes with the correct outer diameter.
Pros and Cons
Pros
Simplifies installation with its slip-through design.
Reduces installation time due to the absence of a pipe stop requirement.
Durable construction ensures a long service life.
Offers flexibility in placement and fitting due to its design.
Compatible with standard 2" plumbing pipes.
Cons
Only compatible with 2" pipes, limiting broader application.
Requires adequate pipe length to accommodate the slip-through mechanism.
May require specific tools or techniques for precise fitting in some scenarios.
Not suitable for applications requiring a visible pipe stop for visual confirmation of insertion depth.
Setup, Compatibility & Care
Setup:
Ensure the ends of the 2" pipes to be connected are clean, smooth, and free from debris.
Slide the McAlpine Universal Slip Through Straight Connector onto one of the pipes, allowing it to slip past the intended joint area.
Align the second pipe into the other end of the connector.
Slide the connector back over the joint to create a secure seal. Ensure adequate sealant or solvent cement is applied according to the specific plumbing code and material requirements for your pipes.
Compatibility:
This connector is designed specifically for use with standard 2" nominal diameter pipes. Verify your pipe's outer diameter matches the intended fit.
Ensure compatibility with the type of piping material you are joining (e.g., PVC, ABS, cast iron).
Care:
The connector is made from durable materials and requires minimal care.
Periodically inspect connections for any signs of leaks or wear.
Clean the exterior with a damp cloth if necessary. Avoid using abrasive cleaners or solvents that could damage the material.
The Range£11.44Visit shop 
eBay£12.02Visit shop 
Debenhams£12.30Visit shop