Excel 18V Brushless Impact Driver Body Only - 1/4" Chuck

This is a body-only tool and requires a separate Excel 18V lithium-ion battery and compatible charger. Please refer to the Excel power tool accessories range for compatible models.

While it can drill pilot holes, its primary function is impact driving and bolt removal due to its high torque and impact mechanism. For precise drilling, a standard drill/driver is generally recommended.

Pull back the collar on the 1/4" chuck, insert the desired bit until it clicks into place, and then release the collar.

Warranty information typically varies. Please check the product packaging or the official Excel website for specific warranty details applicable to your region and purchase.

It's recommended to wipe down the tool after each use and ensure ventilation slots are clear of debris. A more thorough cleaning can be done periodically as needed.

The LED worklight typically stays on for a short period after the trigger is released to allow you to see your work area as you finish.

Ensure the battery is fully charged and correctly inserted into the tool. Check if the battery contacts are clean.

The battery may be low on charge; recharge it. Clean any debris from the ventilation slots and check if the bit is excessively worn or damaged.

Inspect the chuck for debris. Gently try to rotate it while pressing the release mechanism. If persistent, a small amount of lubricant on the mechanism might help, but avoid over-lubrication.

Confirm you are using the correct bit for the application and that it is fully seated in the chuck. Ensure the battery is fully charged.