eSkde Garden Tiller Cultivator Rotovator - 52Cc - 2 Stroke

Use a mix of unleaded gasoline and 2-stroke engine oil. The ratio is typically 50:1, but always refer to your user manual.

This tiller uses a 2-stroke engine, which means the oil is mixed with the fuel and does not require separate oil changes. However, regular maintenance of the air filter is recommended.

Remove the air filter and tap it to remove loose dirt. For heavy soiling, clean with soap and water, let it dry, and re-oil before re-installing.

Drain the fuel tank, clean the tiller, and store it in a dry, covered area. Consider removing the spark plug and adding a small amount of oil to the cylinder.

Always wear eye protection and sturdy footwear. Avoid loose clothing. Keep hands and feet away from moving parts. Operate the tiller on stable ground.

The tilling depth can be adjusted, but the standard depth is around 6-8 inches.

Inspect the tines before each use for wear and tear. Sharpen or replace them as needed to ensure optimal performance.

Check the fuel level, ensure the choke is correctly set, and check the spark plug.

Check the fuel lines for clogs, clean or replace the spark plug, and adjust the carburetor if necessary.

Check that the drive belt is engaged and not broken or worn. Inspect for any obstructions around the tines.

Check the tines for wear or damage and replace if needed. Also, make sure the tilling depth is appropriate for the soil type.