Plasplugs Super Toggle Countersunk Hollow Wall Anchor - 10mm Dia x 37mm L, Pack of 10

The weight limit depends on the specific product. Always refer to the product packaging for the correct weight limit.

You will need a drill, a drill bit of the correct size (specified on the packaging), a screwdriver, and potentially a level.

It is generally not recommended to reuse toggle fixings, as the expansion mechanism may be compromised upon removal.

These fixings are designed for 10mm-15mm walls. Using them on thicker walls may not provide a secure hold.

You can remove the fixings by unscrewing the item, then either pushing the toggle through the wall or cutting it off inside the cavity (if accessible).

The product description does not specify suitability for outdoor use; consider rust-resistant options if using outdoors.

Ensure the hole size is correct. If the hole is too large, consider using a larger toggle fixing or filling the hole with a suitable filler.

Make sure the expanding wings have deployed correctly inside the cavity. Ensure the item being mounted isn't too thick, preventing the toggle from fully expanding.