Best current price£230.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£230.95Visit shop B&Q - White Primed Mdf Torus Ogee Skirting Board (T) 18mm (W) 144mm (L) 2.4MPack Of 10
Visit shop1 offer from £230.95
View price history by clicking the chart icon.
The Snowdon Timber Torus Ogee Skirting Board is an ideal solution for homeowners and professional contractors looking to achieve a clean, decorative finish in any interior space. It offers the key benefit of a pre-primed, defect-free surface that significantly reduces preparation time during installation; however, users should note that a final topcoat is required to achieve the desired aesthetic and long-term durability.
| Colour | White |
|---|---|
| Series | Torus Ogee |
| Brand | Snowdon Timber |
It arrives with a factory-applied primer in white, which serves as a base coat. It is not finished with a final topcoat.
While the board is durable, it is timber-based. Ensure all cut ends are properly sealed with paint to prevent moisture ingress if installing in humid areas.
Standard water-based or oil-based interior wood paints are compatible with the factory primer.
Yes, they are specifically manufactured to be free from knots and defects for a clean, consistent appearance.
Use a miter saw set to a 45-degree angle to create miter joints, ensuring the profiles align perfectly at the corner.
Ensure walls are plumb and use a miter saw set to a 45-degree angle for precise corner cuts. If walls are slightly bowed, use flexible decorators caulk to fill minor gaps.
Lightly sand the pre-primed surface with fine-grit sandpaper (240 grit) to provide 'tooth' for the topcoat, then ensure the surface is clean and dust-free before painting.
Use a nail punch to drive the heads slightly below the surface, fill with paintable wood filler, allow to dry, and sand flush before applying the final coat.
Installation requires standard carpentry tools, including a miter saw for clean corner joints and high-quality wood adhesive or finishing nails. Before installation, it is recommended to let the timber acclimatize to the room's temperature for at least 24 hours to ensure stability.
Once installed, ensure all nail heads are punched below the surface and filled with a suitable wood filler before applying your final topcoat. For long-term care, simply wipe the skirting boards with a soft, damp cloth as needed to remove dust. Avoid using abrasive sponges or harsh chemical cleaners, as these may damage the painted finish over time.
