Intex Plunger Valves - 2 Pack
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for Intex above-ground pool owners who need to manage their water flow for maintenance or filter changes. The Intex Plunger Valve 25010 (2-pack) offers a simple, effective way to quickly stop water flow, making hose and pump replacements significantly easier. A key caveat is ensuring compatibility with your specific Intex pool system, as these valves are designed for 1.5-inch hoses with 2.5-inch threaded fittings.
All features
| Model Part Number | 25010 |
|---|---|
| Brand | Intex |
Extended Product Information
FAQs
What size hoses do these Intex plunger valves fit?
These valves are designed for Intex pools that use 1.5-inch diameter hoses with 2.5-inch threaded connector fittings.
Are these valves compatible with all Intex filter pumps?
They are compatible with several specific Intex filter pump models (e.g., 28635EG, 28671EG). They are not interchangeable with reference 10496 and may require strainer changes if replacing older valve reference 05NF-30.
Do I need to drain my pool to use these valves?
No, the primary purpose of these valves is to allow you to disconnect hoses for maintenance without draining the entire pool.
What is included in the package?
Each plunger valve assembly includes the plunger valve itself, a hose o-ring, and a step washer.
How do I know if I need to replace my old plunger valves?
If your current valves are leaking, difficult to operate, or broken, it's time to replace them. These can also be used as an upgrade for easier hose management.
Can I use these valves on other brands of pools?
These valves are specifically designed for Intex systems with 1.5-inch hoses and 2.5-inch threaded fittings. Compatibility with other brands is not guaranteed.
Troubleshooting
Valve does not seal properly.
Check the o-ring for damage or debris. Ensure the valve is fully closed. Verify the hose and fitting sizes are correct for this valve model.
Difficulty screwing valve onto fitting.
Ensure the fitting is clean and free of debris. Double-check that you are using the correct valve for your hose/fitting size (1.5" hose, 2.5" threaded connector).
Water leaks around the valve stem when closed.
The valve may be worn or damaged. Consider replacing the valve. Ensure the valve is fully rotated to the closed position.
Pros and Cons
Pros
- Simplifies pool maintenance and filter changes.
- Provides a secure shut-off for water flow.
- Includes essential parts (o-ring, step washer) for installation.
- Offers a cost-effective replacement or upgrade solution.
- Designed for easy handling and operation.
Cons
- Requires specific hose and fitting sizes (1.5-inch hose, 2.5-inch threaded connector).
- Not compatible with all Intex pool systems (e.g., reference 10496).
- May require changing strainers if replacing older valve reference 05NF-30.
- Plastic construction, while durable, may be susceptible to UV degradation over extended periods if not protected.
Setup, Compatibility & Care
Compatibility:
- Ensure your Intex pool system uses 1.5-inch diameter hoses.
- Verify the threaded connector fitting on your hoses is 2.5 inches.
- These valves are compatible with several Intex filter pump models including 28635EG, 28633EG, 28671EG, 28645EG, 28647EG, 28651EG, 28677EG, & 28681EG.
- Note: These valves are not interchangeable with reference 10496.
- If replacing older valve reference 05NF-30, you may also need to change your strainers.
Setup:
- Turn off your pool pump.
- Locate the hose connections to your filter pump.
- Screw the plunger valve onto the threaded fitting of the hose.
- Ensure the valve is in the closed position before disconnecting hoses.
- Reverse the process for reassembly.
Care:
- After use, rinse the valves with fresh water to remove any chlorine or pool chemicals.
- Store in a cool, dry place away from direct sunlight when not in use to prolong material life.
- Periodically check the o-ring for wear and tear; replace if cracked or brittle.