Best current price£31.35from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£31.35Visit shop Abb System Pro M Compact Switch-Disconnector - 2Cdd282101r0040
Visit shop2 offers from £31.35 - £59.12
View price history by clicking the chart icon.
This ABB System pro M compact switch-disconnector is designed for industrial applications requiring a reliable main switch. It offers robust performance with a 40A continuous current rating and a 11kW rated power at AC-3, 400V, ensuring safe operation for demanding loads. A potential caveat for some users might be its IP20 protection rating, which makes it suitable for enclosed environments and not exposed to direct water or dust ingress.
| Series | System pro M compact |
|---|---|
| Model Part Number | 362004 |
| Brand | ABB |
It is designed to function as a main switch for disconnecting electrical power to a circuit or piece of equipment, ensuring safety during maintenance or operation.
Yes, the voltage type is specified as AC/DC, making it suitable for both types of electrical systems within its voltage and current ratings.
IP20 indicates that the device is protected against solid objects larger than 12.5mm (like a finger) but offers no protection against water ingress. It should be installed in a protected environment.
This model is a 2-pole switch, meaning it can switch two separate conductors simultaneously.
The AC-3 rating signifies its suitability for switching motor loads. It can handle the higher starting currents of electric motors.
While designed for reliable operation, its primary role is as a main switch for isolation. For very frequent switching, dedicated contactors might be more appropriate depending on the application's duty cycle.
The device has a width of 2 modular spacings, making it relatively compact for integration into standard electrical enclosures.
Verify that the control voltage is applied correctly and within the specified operating range. Check for any mechanical obstructions preventing movement.
Ensure all connections are tightened to the recommended torque. Check that the connected load does not exceed the switch's rated continuous current (40A).
Confirm that the input power supply is active. Check the continuity of the switch contacts using a multimeter (with power off).
Verify the load current against the switch's rating. Check for short circuits in the load wiring or the connected equipment.
Setup: This switch-disconnector is designed for DIN rail mounting, occupying two modular spacings. Ensure it is installed in a dry, dust-free environment with adequate ventilation. Connect the main power supply to the input terminals and the load to the output terminals according to the wiring diagram. Always ensure power is disconnected before wiring.
Compatibility: It is compatible with AC/DC voltage systems up to 440V AC. The system should accommodate its 40A continuous current rating and 10kA switching capacity. Ensure the enclosure or panel provides appropriate protection from dust and moisture.
Care: Maintain the IP20 rating by ensuring the switch-disconnector is installed within an enclosure that meets or exceeds this standard. Periodically check terminal connections for tightness, especially in environments with vibration. Clean the exterior with a dry or slightly damp cloth; avoid using solvents or abrasive cleaners.
