Best current price£5.94from The Range
Shopping.co.uk recommended and popular offers
The Range£5.94Visit shop Unifix Drywall Screws Bugle Head Fine Thread Zyp Ce - 3.5 X 32Mm - 9Tqdrywall/115 - Box Of 200 - Grey
Visit shop32 offers from £5.94 - £14.32
View price history by clicking the chart icon.
The Unifix Drywall Screws Bugle Head Fine Thread are essential fasteners for both professional contractors and DIY enthusiasts looking to achieve a secure, professional finish in drywall installation. These screws offer superior holding power and a clean, flush appearance, though users should ensure they are using the correct length and drill bit for their specific wall thickness to avoid over-driving the screws.
| Colour | Grey |
|---|---|
| Model Part Number | 1263264 |
| Brand | Unifix |
No, these are fine-thread screws specifically designed for metal framing. For wood studs, you should use coarse-thread drywall screws.
No, these screws are designed to be self-drilling into metal studs when used with a standard power drill.
A standard power drill or a dedicated drywall screwdriver with a PH2 bit is recommended.
The screw head should be slightly below the surface of the drywall paper, leaving a small dimple that can be filled with joint compound.
These screws are intended for interior drywall use. They are not specifically rated for high-moisture or exterior environments.
Adjust the depth setting on your drywall gun or reduce the torque setting on your drill to stop the screw from going too deep.
Verify that you are driving the screw into a metal stud; these fine-thread screws are not designed for wood framing.
Ensure you are using the correct Phillips driver bit size and that the bit is not worn down.
To ensure the best installation, match your screw length to the thickness of your drywall. Use a standard electric screwdriver or a dedicated drywall gun. When storing, keep the screws in a cool, dry place to prevent moisture exposure, which can affect the coating. Always ensure your drill's torque clutch is set correctly before starting a large project to avoid stripping the screw head or burying the screw too deeply into the gypsum board.
