Shimano Nexus CN-NX10 Single Speed Chain - 1/2" x 1/8" - 114L - Silver

You will need a chain tool to remove or install links, a chain connector pin (included), and possibly a screwdriver for adjustments.

Clean and lubricate the chain every 100-200 miles, or more often if riding in wet or dirty conditions.

Use a bicycle chain lubricant suitable for your riding conditions (wet or dry). Avoid using WD-40 or other general-purpose lubricants.

Use a chain wear indicator tool. Replace the chain when it reaches the wear limit (typically 0.75% or 1.0%).

No, this chain is designed specifically for single-speed and Nexus internal gear hub bicycles.

The chain weighs 364g.

Check for worn chain links or cassette teeth. Clean and lubricate the chain. Adjust the rear derailleur or cable tension.

Clean the chain thoroughly, and apply a rust inhibitor or replace the chain if the rust is extensive.

Ensure the chain length is correct for your bike's setup. Remove or add links as needed, using a chain tool.