E-Tech Engineering Pro Alloy Wheel Paint - Metallic Graphite, Grey

Typically, 2-3 thin, even coats are recommended for best results. Always refer to the specific instructions on the product can for detailed guidance.

Drying times can vary based on temperature and humidity. Generally, the paint is touch-dry within 15-20 minutes, but a full cure can take up to 24-48 hours. Allow adequate time before driving.

This product is specifically formulated for alloy wheels. While it might adhere to steel wheels, results and durability may vary. For steel wheels, a different type of primer and paint may be more suitable.

The container volume for this product is 400ml.

When applied correctly to a properly prepared surface, the finish is designed to be long-lasting and resistant to road elements, cracking, and flaking.

Yes, if the existing paint is in good condition and properly cleaned and lightly abraded. If the existing paint is peeling or damaged, it must be removed.

A range of high-tech, modern colours are available to suit various vehicle styles.

Ensure the nozzle is clear. Shake the can vigorously for an extended period. If the problem persists, the can may be faulty.

Surface preparation was likely insufficient. Ensure wheels were thoroughly cleaned, degreased, and possibly lightly abraded before application. Ensure correct application temperature was maintained.

Applied coats too thickly or sprayed too close to the surface. Apply subsequent coats more thinly and from the recommended distance. Allow sufficient drying time between coats.

The paint may not have been allowed to cure fully. Allow the paint to cure for the recommended time (check product instructions) before exposing it to harsh conditions or cleaning chemicals.