Automotive Authority Side Body Trim Molding - Chrome - 2.25" Wide
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 2.25" Chrome Side Body Molding Roll from Automotive Authority is designed for owners of 1973-1987 Chevy/GMC pickup trucks and Suburbans (including C10, C20, C30, K10, K20, K30, V10 models and trims like Custom Deluxe, Silverado) seeking to restore or enhance their vehicle's exterior. Its key benefit is providing a durable, weather-resistant, and visually appealing chrome accent with an easy-to-apply adhesive backing. A potential caveat is the need to accurately measure your vehicle before purchase to ensure the 320-inch roll provides sufficient length for your specific application.
All features
| Model Part Number | 7387CBxx |
|---|---|
| Brand | Autmotive Authority |
Extended Product Information
FAQs
What vehicles is this side body molding compatible with?
This molding is designed for 1973-1987 Chevrolet and GMC C/K/V series pickup trucks and Suburbans, including models like C10, C20, C30, K10, K20, K30, and V10.
How much molding is included in one roll?
Each roll contains 320 inches of molding, with a manufacturing tolerance of +/- 4 inches.
Do I need to buy special adhesive?
No, the molding comes with a strong, pre-applied adhesive backing designed for a secure and long-lasting hold.
How do I ensure I have enough molding for my truck?
You should measure the exact lengths where you intend to apply the trim on your vehicle before purchasing to confirm if the 320-inch roll is sufficient.
Is the chrome finish durable against weather?
Yes, the molding is rated for UV protection and is constructed to withstand various weather conditions.
Can I cut the molding to size?
Yes, you can cut the molding to your desired length using a sharp utility knife or razor blade for a clean cut.
What is the best way to clean and maintain the chrome finish?
Clean regularly with a soft cloth and mild automotive soap. Avoid abrasive cleaners. For best results, use a dedicated automotive chrome polish.
Troubleshooting
Molding not adhering properly
Ensure the surface is clean, dry, and free from wax or silicone. Apply firm, even pressure along the entire length. Consider using a heat gun on a low setting to slightly warm the adhesive and surface for better adhesion, but avoid overheating.
Bubbles or wrinkles in the molding
If bubbles or wrinkles appear during application, carefully peel back the affected section and reapply, smoothing out the material as you go. For minor wrinkles, gentle warming with a heat gun might help them settle.
Molding seems too short or too long
Measure your vehicle carefully before cutting. If too short, you may need to order an additional roll. If too long, trim carefully with a sharp utility knife or razor blade, ensuring a clean, straight cut.
Chrome finish dulling over time
Clean the molding regularly with a soft cloth and mild automotive soap. Avoid harsh chemicals. For a restored shine, use a dedicated chrome polish designed for automotive use.
Pros and Cons
Pros
- Enhances vehicle appearance with a bright chrome finish.
- Durable construction with UV protection for longevity.
- Easy installation due to pre-applied strong adhesive.
- Designed for specific classic Chevy/GMC truck models.
- Sufficient length for most restoration projects.
Cons
- Requires careful measurement before purchase to ensure adequate length.
- May not be suitable for custom applications outside specified models.
- Chrome finish may require regular cleaning to maintain shine.
- Adhesive may be difficult to reposition once applied.
Setup, Compatibility & Care
Compatibility: This molding is specifically designed for 1973-1987 Chevrolet and GMC C/K/V series trucks and Suburbans. It is crucial to measure your vehicle's required trim length before purchasing, as the 320-inch roll may need to be cut to size. Ensure the application surface is clean and dry before proceeding.
Setup:
- Clean the application area thoroughly with a mild soap and water solution, then dry completely. Avoid using silicone-based cleaners, as they can interfere with adhesion.
- Measure and mark the desired length for application.
- Slowly peel back the adhesive backing, aligning the molding with your marks.
- Apply firm, even pressure along the entire length of the molding to ensure a strong bond. Avoid stretching the material during application.
Care: To maintain the shine of the chrome finish, regularly clean the molding with a soft cloth and mild automotive soap. Avoid abrasive cleaners or tools that could scratch the surface. For stubborn dirt, a mixture of water and white vinegar can be used sparingly, followed by a thorough rinse and dry.