Best current price£14.58from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£14.58Visit shop Draper 39253 Soft Grip Hacksaw With 45° & 90° Blade Positions 300Mm 24Tpi Each
Visit shop
B&Q£23.01Visit shop B&Q - Soft Grip Hacksaw With 45 Degree & 90 Degree Blade Positions300mm24Tpi 39253
Visit shop12 offers from £14.58 - £34.99
View price history by clicking the chart icon.
This Draper Hacksaw is designed for DIY enthusiasts and professionals needing a reliable tool for cutting various materials like metal and plastic. Its key benefit lies in its versatility, allowing for both straight and 45° cuts thanks to its dual blade spigots. A potential caveat for some users might be the included blade's specific TPI count, which may require purchasing an alternative for different material types.
| Model Part Number | 39253 |
|---|---|
| Brand | Draper |
This hacksaw is primarily designed for cutting metal, plastic, and wood. The effectiveness on wood depends heavily on the blade used; for general purposes, it is best suited for metal.
Loosen the tensioning screw at the end of the frame. Remove the old blade and insert the new one into the chosen spigots, ensuring teeth face forward. Retighten the tensioning screw until the blade is firm.
TPI stands for Teeth Per Inch. A 24Tpi blade has 24 teeth per inch and is generally suitable for cutting medium to thin metals.
While technically possible with the right blade, this hacksaw is optimized for metal. For significant wood cutting, a dedicated wood saw is recommended. A higher TPI blade (e.g., 18TPI) might perform better on some woods than the included 24Tpi blade.
Align the blade with the spigots designated for 45° cuts on the frame. This will hold the blade at the correct angle relative to the frame, allowing you to make angled cuts.
Please refer to the Draper warranty information provided with your purchase for specific details on the warranty period and coverage.
Ensure the blade is correctly seated in both spigots. Check that the tensioning screw is functioning correctly and is not stripped. Try a different 300mm blade if the issue persists.
Verify the blade is properly tensioned; a loose blade is more prone to breaking. Ensure you are not applying excessive downward pressure, especially at the start of a cut. Use the correct TPI blade for the material.
Check the blade tension and straightness. Ensure the frame is not flexing. Make sure the workpiece is securely clamped and that you are using a consistent cutting stroke.
Setup: To set up the hacksaw, select one of the two blade spigots to align with your cutting needs (straight or 45°). Insert the 300mm blade, ensuring the teeth are pointing forward. Tighten the blade tensioning screw until the blade is taut. A slightly overtightened blade is better than a loose one.
Compatibility: This hacksaw is compatible with standard 300mm hacksaw blades. For optimal performance, match the blade's TPI to the material being cut: higher TPI for harder, thinner materials; lower TPI for softer, thicker materials.
Care: After use, clean the frame and blade to remove any debris. Store the hacksaw in a dry place to prevent rust. Periodically check the blade tension and the condition of the blade itself.
