kenable ADSL 2+ High Speed Broadband Modem Cable - RJ11 to RJ11 - 10m - BLACK

The main benefit is its ability to transmit data significantly faster than standard phone cables, ensuring you can achieve the maximum possible speed from your ADSL or ADSL2+ internet service and reducing transmission errors.

This cable directly connects your modem to the wall socket. While it ensures your modem gets the best possible signal, it does not directly affect your Wi-Fi speed, which depends on your router's capabilities and your home's Wi-Fi environment.

No, this cable is specifically designed for ADSL and DSL internet connections that use a telephone line. It is not compatible with fibre optic or cable internet services.

AWG stands for American Wire Gauge. A lower AWG number, like 26 in this case, indicates a thicker wire, which generally allows for better signal transmission and less resistance over the cable length.

The higher quality construction and Category 5 rating of this cable ensure a cleaner, more robust signal transmission compared to standard phone cables. This reduces signal degradation and interference, leading to fewer errors, especially at high speeds.

This cable is designed for connecting your modem or router to the telephone wall socket. If you need to connect a phone to the same line, you would typically use a microfilter or a splitter at the wall socket, allowing both devices to share the line.

The cable is a Category 5 structured cable capable of transmitting data at up to 100Mbps. However, the actual speed you achieve will be limited by your internet service provider's plan and your modem's capabilities.

Verify both ends of the cable are securely connected. Ensure your modem/router is properly configured for your ISP and try restarting your modem.

Confirm your ISP plan supports higher speeds and that your modem is capable of those speeds. Check for signal interference or other network issues. This cable optimizes the connection but cannot increase ISP-provided speed limits.

Check for damage to the cable or connectors. Try a different wall socket if available. Ensure the cable is not being stressed or pinched.

Ensure you are using the correct RJ-11 connector for DSL/modem ports, not an Ethernet (RJ-45) port. This cable uses standard telephone connectors.