Shopping.co.uk

Maston Car-Rep Auto Spray Stonechip Coating Black 500ml

Maston Car-Rep Auto Spray Stonechip Coating Black 500ml

Weight: 1.10231131 pounds, Manufacturer: Maston. This stone chip coating from Maston is designed t...

Best current price£10.19from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

7 offers from £10.19 - £46.19

View price history by clicking the chart icon.

eBayMaston Car-Rep Auto Spray Stonechip Coating Black 500ml
Free delivery in 1–3 days
£10.19
Visit shop

Product Information

Full details

This guide is for car owners looking to protect their vehicle's surfaces from road debris and stone chips. The Maston Car-Rep Auto Spray offers a durable, flexible barrier that prevents damage, with its black color providing a subtle finish. While effective, ensure proper ventilation during application as it is an aerosol product.

All features

Model Part Number4150501-EU
BrandMaston

Extended Product Information

FAQs

How many coats are recommended?

For optimal protection, it is recommended to apply 2-3 thin, even coats, allowing adequate drying time between each application.

How long does the coating take to dry?

Drying time can vary depending on temperature and humidity. Typically, recoat time is 5-10 minutes, and full cure can take several hours.

Can this be applied over existing paint?

Yes, provided the existing paint is clean, dry, and free from contaminants. It is recommended to test on an inconspicuous area first.

Is the black color permanent?

Yes, the black color is a permanent finish once the coating has fully cured. It is designed to be durable and resistant to fading.

What is the coverage area of a 500ml can?

Coverage varies based on the thickness of application, but a 500ml can typically provides sufficient coverage for the lower sections of a standard car or specific high-wear areas.

Can I paint over this stonechip coating?

Yes, after full curing, the stonechip coating can be painted over with most automotive topcoats, although testing on a small area is advisable.

Troubleshooting

Uneven spray pattern

Ensure the can is held at the correct distance and angle. Shake the can more frequently during use. Clean the nozzle by turning the can upside down and spraying briefly after each use.

Coating not adhering well

Re-ensure the surface was properly cleaned and degreased before application. Check for any moisture or contamination on the surface. Ensure the product was applied to a dry surface.

Runs or drips on the surface

Application may have been too heavy or the can was held too close to the surface. Allow the affected area to dry, then gently sand it down and reapply in lighter, even coats.

Can is not spraying

Check if the nozzle is clogged. Clean the nozzle with a solvent or replace it if necessary. Ensure the can is adequately shaken and upright.

Pros and Cons

Pros

  • Provides excellent protection against stone chips and road debris.
  • The flexible nature of the coating prevents it from cracking under stress.
  • The black color is practical for hiding dirt and blends well with vehicle underbodies.
  • The 500ml can offers good value and coverage for most vehicles.
  • Easy to apply using the aerosol spray can.

Cons

  • Requires adequate ventilation due to aerosol nature.
  • Surface preparation is crucial for optimal adhesion.
  • The black color might not suit all aesthetic preferences if applied to visible areas.
  • Drying time may vary depending on environmental conditions.

Setup, Compatibility & Care

Setup:

  1. Preparation: Ensure the surface to be treated is clean, dry, and free from rust, grease, and loose paint. Sand down any rough areas if necessary.
  2. Masking: Protect surrounding areas, such as paintwork, windows, and mechanical parts, with masking tape and paper.
  3. Application: Shake the can vigorously for at least two minutes before use. Hold the can upright and approximately 25-30 cm (10-12 inches) from the surface. Apply in thin, even coats, allowing 5-10 minutes drying time between coats.

Compatibility:

This product is designed for automotive metal surfaces. It is compatible with most automotive paints and primers.

Care:

Once cured, the stonechip coating is durable and requires minimal care. It can be cleaned with standard car washing detergents and water. Avoid using abrasive cleaners or high-pressure washing directly on the coated area for extended periods, as this could potentially damage the coating over time.

Price History

DatePrice
Visit shop