Best current price£6.11from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£6.11Visit shop ELRING Gasket, exhaust pipe MERCEDES-BENZ,JEEP,CHRYSLER 152.220 05175669AA,52124282AA,05175669AA 52124282AA,05175669AA,52124282AA,2194920080
Visit shop11 offers from £6.11 - £18.66
View price history by clicking the chart icon.
The Elring 152.220 Exhaust Pipe Gasket is designed for automotive technicians and DIY mechanics looking to ensure a leak-free seal at the turbocharger-to-exhaust connection. It provides a robust, heat-resistant barrier that maintains exhaust system integrity and engine performance; however, users must strictly verify vehicle-specific compatibility as even slight dimensional variations can affect the seal quality.
| Model Part Number | 152.220 |
|---|---|
| Brand | Elring |
No, this gasket is a crush-type seal designed for a single use. Reusing it will likely result in an improper seal and exhaust leaks.
No. This gasket is specific to certain applications. You must verify your vehicle's engine model and part compatibility before installation.
Use a non-abrasive scraper and a light solvent to remove old gasket material without scratching the metal surface.
Generally, this gasket is designed to be installed dry. Using aftermarket sealants can interfere with the heat-resistant properties of the gasket material.
Common signs include a loud ticking sound from the engine bay, a smell of exhaust fumes in the cabin, or visible soot deposits around the turbo connection.
Check that the flange bolts are tightened to the correct torque specification and verify the gasket is seated evenly.
This indicates an incomplete seal; disassemble, clean the mating surfaces, and replace with a new gasket.
To ensure a successful installation, first confirm that the part number 152.220 matches your specific engine code and vehicle model. During setup, ensure that both mating surfaces are free of debris, old gasket material, and carbon buildup. Use a torque wrench to tighten the connecting bolts to the manufacturer’s specified torque settings; uneven tightening is a common cause of premature failure. Do not reuse an old gasket, as the material is designed to deform slightly upon initial compression to create a permanent seal. If the vehicle is stored in high-humidity areas, inspect the area occasionally for signs of surface oxidation near the flange.
