Ferand Smokeless Fire Pit - 40.1 cm Diameter - Wood Burning - Stainless Steel
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ferand Smokeless Fire Pit is designed for outdoor enthusiasts who want a cleaner, more enjoyable bonfire experience. Its key benefit is advanced smokeless technology that reduces smoke, allowing for better ambiance during gatherings. A potential caveat is the need for a stable, non-flammable surface and the use of dry wood for optimal performance. This portable, lightweight fire pit is crafted from durable stainless steel, facilitating quick and complete burning, easy maintenance, and versatile use for camping or backyard parties.
All features
| Model Part Number | 5008245793119 |
|---|---|
| Brand | Ferand |
Extended Product Information
FAQs
Is this fire pit truly smokeless?
The Ferand Smokeless Fire Pit features advanced technology designed to minimize smoke significantly. While it's highly effective, some minimal smoke may still be produced, especially during ignition or if using damp wood.
What type of wood should I use?
For the best smokeless performance and efficient burning, use dry, seasoned hardwood. Avoid using treated lumber, particleboard, or trash, as these can produce harmful fumes and residue.
How large is the fire pit?
The Ferand Smokeless Fire Pit has a diameter of 40.1 cm (approximately 15.8 inches).
Can I use this on my wooden deck?
It is strongly recommended to place the fire pit on a stable, non-flammable surface. Using it on a wooden deck requires a heat-resistant mat or a thick layer of non-combustible material like gravel or paver stones to prevent heat damage.
How do I clean the fire pit?
Once cooled, remove ash with a brush or shovel. Wipe the exterior with a damp cloth. For tougher marks, a mild soap solution can be used, followed by rinsing and thorough drying. Ensure it is completely dry before storing.
Is it safe to use indoors?
No, this fire pit is designed for outdoor use only. Never use it indoors, in garages, or any enclosed spaces due to the risk of carbon monoxide poisoning and fire hazards.
What is the material of the fire pit?
The fire pit is constructed from durable stainless steel.
Troubleshooting
Fire pit produces excessive smoke.
Ensure you are using dry, seasoned hardwood. Check that the airflow vents are clear and not obstructed. Smoke can also be higher during the initial ignition phase.
Wood is not burning efficiently.
Confirm that the wood is completely dry. Try adding more kindling to establish a stronger base flame. Ensure the fire pit is not overcrowded with wood.
Difficulty in cleaning the ash.
Wait for the fire pit to cool completely. Use a small shovel or brush to remove ash. For any residue, a damp cloth can be used after the ash is removed.
Stainless steel shows discoloration.
Discoloration, often a blue or brown hue, can occur on stainless steel due to heat. This is normal and does not affect the structural integrity or safety of the fire pit. Gentle cleaning with a stainless steel cleaner can sometimes help mitigate this.
Pros and Cons
Pros
- Significantly reduces smoke for a more pleasant experience.
- Constructed from durable stainless steel for long-lasting use.
- Portable and easy to move between locations.
- Burns wood efficiently, providing good heat.
- Simple to clean and maintain.
Cons
- Requires a stable, non-flammable surface for safe operation.
- Best performance is achieved with dry wood, which may need preparation.
- While smokeless, some minimal smoke may still be present, especially during ignition.
- Limited to wood fuel sources.
Setup, Compatibility & Care
Setup:
- Place the fire pit on a flat, stable, and non-flammable surface (e.g., concrete, gravel, or a fire-resistant mat).
- Ensure there is adequate clearance from combustible materials like fences, trees, or buildings.
- Add dry, seasoned hardwood for best results and minimal smoke.
Compatibility:
- Fuel: Compatible with standard dry firewood. Avoid using treated lumber, plastics, or other artificial materials.
- Surfaces: Suitable for use on concrete, brick, stone, sand, or gravel. Not recommended for use directly on wooden decks or dry grass without a protective barrier.
Care:
- Allow the fire pit to cool completely before cleaning.
- Remove ash after each use. Ash can be disposed of once fully cooled.
- Wipe down the stainless steel exterior with a damp cloth. For stubborn marks, a mild soap can be used, followed by rinsing and drying.
- Store in a dry place when not in use to prevent prolonged exposure to moisture.