Best current price£7.66from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£7.66Visit shop Floplast Flofit+ Push Fit Flexi Hose With Tap Connector - 22Mm X 3/4Andquot; X 300Mm
Visit shop1 offer from £7.66
View price history by clicking the chart icon.
The FloPlast FloFit+ Tap Connector is designed for both professional plumbers and DIY home improvers who need a reliable, leak-free connection between 22mm plastic push-fit pipes and standard hot or cold taps. Its primary benefit is the 300mm flexible hose, which simplifies installations in cramped spaces or where pipe alignment is slightly off, though users should ensure they are using compatible 22mm plastic pipework to maintain the integrity of the push-fit seal.
| Model Part Number | 1328503 |
|---|---|
| Brand | FloPlast |
No, this connector is specifically engineered for 22mm plastic pipework.
No, the push-fit technology requires no tools, glue, or soldering to create a watertight seal.
Yes, the 300mm flexible hose provides sufficient length for most standard sink and basin installations.
Yes, most push-fit systems are demountable using a release tool, though it is best to avoid frequent removals.
It is designed for standard hot and cold water supplies; verify your specific heating system pressure ratings against the product specifications.
Ensure the pipe is pushed fully into the connector and is cut perfectly square with no burrs on the end.
Check that the pipe diameter is exactly 22mm and that the end of the pipe is not deformed or damaged.
To ensure a secure fit, always cut your 22mm plastic pipe at a 90-degree angle using a pipe cutter to avoid creating jagged edges that could damage the internal O-rings. Ensure the pipe is fully inserted into the push-fit connector—you should feel it pass the initial resistance of the grab ring and hit the stop.
For the 3/4-inch tap connection, use a suitable washer and hand-tighten, following up with a slight turn using a wrench if necessary, taking care not to overtighten. Periodically check these connections for any signs of moisture to ensure the seals remain intact over the life of the installation.
