Oregon AdvanceCut Saw Chain - 16 Inch - 56 Drive Links
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Oregon AdvanceCut Saw Chain is designed for homeowners and landscapers seeking efficient and user-friendly chainsaw performance. Its key benefit is the narrow kerf design, which requires less power for cleaner, faster cuts, making yard work easier. A potential caveat is ensuring your chainsaw meets the specific pitch, gauge, and drive link requirements for optimal fit and function. This guide covers its features, use, and maintenance.
All features
| Model Part Number | 90PX056E |
|---|---|
| Brand | Oregon |
Extended Product Information
FAQs
What size guide bar does this chain fit?
This chain is designed for a 16-inch guide bar that specifically requires 56 drive links, a 3/8 inch low-profile pitch, and a .043 inch gauge.
How do I know if my chainsaw is compatible?
Check your chainsaw's manual or the specifications listed on the guide bar. You need a 3/8" low-profile pitch, .043" gauge, and 56 drive links.
Is this chain suitable for professional use?
The Oregon AdvanceCut Saw Chain is designed for homeowners and landscapers. While durable for its intended use, it may not withstand the demands of heavy-duty professional logging compared to specialized professional chains.
How often should I sharpen the chain?
Sharpening frequency depends on usage and the material being cut. A good rule of thumb is to sharpen when you notice a decrease in cutting performance or when the sawdust starts to look like powder instead of chips.
What does 'narrow kerf' mean?
Narrow kerf refers to the width of the cut made by the chain. A narrower kerf requires less power from the chainsaw and removes less wood material, leading to more efficient cutting.
How does the Lubri-Tec system work?
Lubri-Tec is an automatic oiling system that delivers oil to the chain and guide bar through small holes. This ensures consistent lubrication, reducing friction and wear, and extending the life of the chain and bar.
Can I use this chain on a different brand of chainsaw?
Yes, provided the chainsaw meets the specific pitch (.043"), gauge (3/8" low-profile), and drive link (56) requirements. It is compatible with many brands including DeWalt, Greenworks, Makita, and Dolmar.
Troubleshooting
Chain is not cutting efficiently
Check if the chain is dull and needs sharpening. Ensure the chain is properly tensioned and lubricated.
Chain is loose or comes off the bar
Re-tension the chain according to your chainsaw's manual. Ensure all components are correctly installed and the chain is not damaged.
Chain is not receiving oil
Check the chainsaw's oil reservoir and ensure it is filled. Verify that the oil hole on the bar is clear and that the oiler is functioning. Clean any debris from the chain and bar.
Excessive vibration during use
Ensure the chain is properly tensioned and sharp. Check for any damage to the chain or guide bar.
Pros and Cons
Pros
- Requires less chainsaw power for efficient cutting.
- Reduced kickback and vibration for improved user safety and comfort.
- Automatic oiling system extends chain life.
- Easy to install on compatible chainsaws.
- Suitable for a range of common chainsaw brands.
Cons
- May require more frequent sharpening than professional-grade chains.
- Only compatible with specific pitch, gauge, and drive link counts.
- Not intended for heavy-duty professional logging.
- The narrow kerf may not be ideal for very thick or dense hardwoods.
Setup, Compatibility & Care
Compatibility Check: Before installation, verify your chainsaw's guide bar specifications. This chain requires a 3/8 inch low-profile pitch, a .043 inch (1.1 mm) gauge, and exactly 56 drive links. Check your chainsaw's manual or the existing chain for these details.
Installation: Ensure the chainsaw is turned off and cool. Remove the chain cover. Loosen the bar nuts and remove the old chain. Place the new chain onto the guide bar, ensuring the drive links fit into the bar groove and the drive sprocket. Wrap the chain around the sprocket and over the guide bar. Reinstall the chain cover and tighten the bar nuts, adjusting chain tension according to your chainsaw's manual until it is snug but can still be pulled around the bar by hand.
Care and Maintenance: Keep the chain clean by wiping it down after each use. Regularly check and maintain proper chain tension; a loose chain can derail, while a tight chain increases wear. Ensure the Lubri-Tec system is functioning by checking that oil is being dispensed onto the chain and bar. Sharpen the chain when it starts to dull to maintain cutting efficiency and prevent excessive strain on the saw. Store the chain in a dry place when not in use.