Diall Steel Button Hollow Wall Anchor M5 (L)37mm - Pack Of 25
Best current price£7.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.00Visit shop B&Q - Steel Button Hollow Wall Anchor M5 (L)37mmPack Of 25
Visit shopB&Q£7.00Visit shop One Offer
1 offer from £7.00
View price history by clicking the chart icon.
B&QB&Q - Steel Button Hollow Wall Anchor M5 (L)37mmPack Of 25
Free delivery in 1–3 days
£7.00
Visit shop
Product Information
Full details
This guide is for DIY enthusiasts and tradespeople needing to secure fixtures in plasterboard and hollow walls. The Diall Steel Button Hollow Wall Anchors provide a reliable, permanent fixing solution for light-duty internal applications. A key benefit is their straightforward installation with a setting tool, but they are best suited for thin cavity walls and not for heavy load-bearing applications.
All features
| Brand | Diall |
|---|
Extended Product Information
FAQs
What is the maximum weight these anchors can hold?
These are designed for light-duty applications. The exact weight capacity depends on the wall's condition and the specific load distribution, but they are generally suitable for items like pictures, small shelves, or light fixtures. Always test gently before committing to full load.
Can I use these anchors in solid brick walls?
No, these anchors are specifically designed for hollow walls like plasterboard. They will not provide a secure fix in solid materials.
What size drill bit should I use?
The specific drill bit size depends on the anchor's precise dimensions and your wall material. It is recommended to check the packaging or the setting tool instructions for the recommended drill bit diameter.
Do I need a special tool to install these?
Yes, a wall anchor setting tool is required to properly deploy and secure these hollow wall anchors.
What does M5 refer to?
M5 refers to the thread size of the screw or bolt that can be used with this anchor. It indicates a metric thread with a nominal diameter of 5mm.
How deep does the cavity need to be?
The anchors are designed for a fixture depth range of 8mm to 15mm, meaning the cavity behind your plasterboard should fall within this measurement for the anchor legs to deploy correctly.
Can these anchors be removed and reused?
While they can sometimes be carefully removed, they are intended for permanent installation. Reusing an anchor may compromise its holding power.
Troubleshooting
Anchor spins in the hole before setting.
The hole may be too large. Try using a slightly smaller drill bit or consider a different type of anchor if the hole is significantly oversized.
Setting tool does not grip or set the anchor.
Ensure you are using the correct type of setting tool for this specific anchor. Check that the tool is fully engaged with the anchor before operating.
Anchor legs do not deploy correctly behind the plasterboard.
Verify the cavity depth is within the specified range (8mm-15mm). Ensure no debris is obstructing the anchor's expansion.
Fixture feels loose after installation.
The anchor may not have been set properly, or the wall material is too weak for the load. Re-evaluate the load requirement and consider a stronger fixing solution if necessary.
Pros and Cons
Pros
- Provides a secure and permanent fix in hollow walls.
- Easy to install with the correct setting tool.
- Durable steel construction ensures longevity.
- Neat button head finish.
- Economical pack size for various tasks.
Cons
- Only suitable for light-duty applications.
- Requires a specific wall anchor setting tool.
- Not appropriate for solid walls.
- Limited fixture depth range (8mm-15mm).
- Potential for plasterboard damage if overloaded or over-tightened.
Setup, Compatibility & Care
Setup:
- Drill Hole: Select a drill bit size appropriate for the anchor (refer to tool or packaging for precise size). Drill a hole through the plasterboard at the desired location.
- Insert Anchor: Push the hollow wall anchor through the drilled hole until the flange sits flush against the wall surface.
- Set the Anchor: Use a compatible wall anchor setting tool. Insert the tool into the anchor and operate the handles to expand the anchor legs behind the plasterboard, creating a secure grip.
- Remove Setting Tool: Once set, remove the setting tool. The anchor is now ready for use.
- Attach Fixture: Screw your chosen M5 bolt or screw into the anchor.
Compatibility:
- Wall Type: Specifically designed for plasterboard, hollow-core doors, and other hollow panel materials.
- Cavity Depth: Suitable for wall thicknesses where the cavity depth is between 8mm and 15mm.
- Fixing Size: Accommodates M5 screws or bolts.
- Load: Best for light to medium-duty loads. Always test the fixing before applying full weight.
Care:
These anchors are designed for permanent installation and require no ongoing maintenance. Ensure the surrounding wall area remains dry to prevent any potential corrosion of the steel over extended periods. Once installed, they are meant to remain in place.