Best current price£4.93from B&Q
Shopping.co.uk recommended and popular offers
B&Q£4.93Visit shop B&Q - M6 Hex Carbon Steel (Grade 5.8) Bolt & Nut (L)60mmPack Of 10
Visit shop1 offer from £4.93
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and builders needing reliable fasteners for various projects. The Diall M6 Hex Carbon Steel Bolt & Nut pack offers durability and strength for secure assemblies. A key caveat is that these are not suitable for high-stress or structural applications requiring higher grade materials.
| Brand | Diall |
|---|
These M6 bolts are best suited for general DIY projects, furniture assembly, mounting brackets, and light-duty repairs where moderate strength is required.
The zinc plating offers some corrosion resistance for outdoor use, but prolonged exposure to harsh weather can lead to rust. For highly exposed or critical outdoor applications, consider stainless steel or galvanized fasteners.
You will typically need an M6 wrench or socket (commonly 10mm) to tighten the bolt head, and another wrench to hold the nut.
Grade 5.8 indicates the strength level of the bolt, signifying a minimum tensile strength of 580 MPa. This is a common grade for general engineering and construction but is not typically used for high-stress applications.
Yes, you can cut the bolts to a shorter length using a hacksaw or bolt cutter. However, ensure the cut end is deburred and that sufficient thread length remains for secure fastening.
Store the bolts in a dry place. Avoid scratching the zinc plating. If minor rust appears, clean it off and consider applying a protective coating like clear lacquer or oil.
Check for cross-threading by backing the bolt out and re-aligning. Ensure the M6 nut or threaded hole is clean and free from debris.
Ensure the bolt and nut threads are clean and free of obstructions. Verify that you are using an M6 nut with an M6 bolt.
Use the correct size wrench or socket (e.g., 10mm for M6 hex head) and apply steady, even pressure. Avoid over-tightening.
This can occur if the zinc plating is damaged or exposed to excessive moisture. For minor rust, gently clean with a wire brush. For future use, consider a more corrosion-resistant fastener if the environment is harsh.
Setup: Simply align the bolt with the desired holes and thread the nut onto the bolt. Use a standard M6 wrench or socket to tighten securely. Ensure the threads engage smoothly to avoid cross-threading.
Compatibility: These M6 bolts are compatible with any M6 nuts and M6 threaded holes or inserts. The 60mm length is suitable for joining materials up to approximately 54mm thick (allowing for bolt head and nut engagement).
Care: To maintain longevity, avoid exposing the bolts and nuts to harsh chemicals or prolonged wet conditions, which can degrade the zinc plating. If rust spots appear, they can be lightly sanded and a protective coating applied. Store in a dry environment.
