Best current price£9.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.99Visit shop B&Q - 3" Interface Pad75mm X 10mm Soft Foam Interface PadPack Of 3
Visit shop
The Range£10.99Visit shop Okodoko 3" Interface Pad - 75Mm X 10Mm Soft Foam Interface Pad - Pack Of 3 - Black
Visit shop2 offers from £9.99 - £10.99
View price history by clicking the chart icon.
The OKODOKO 75mm x 10mm soft foam interface pads are essential accessories for professional woodworkers and automotive technicians who need to achieve a uniform finish on complex, contoured surfaces. By acting as a cushioning layer between the sanding disc and the sander's backing pad, these interface pads ensure consistent pressure distribution and significantly reduce the likelihood of over-sanding delicate edges; however, users should note that the added flexibility may slightly reduce the aggressive material removal rate compared to rigid backing setups.
| Model Part Number | 1502946 |
|---|---|
| Brand | OKODOKO |
While the foam is durable, these are primarily designed for dry sanding applications.
It is best to clean them with compressed air; soaking them in water can affect the adhesive bond of the hook-and-loop backing.
No, these are 75mm (approx 3-inch) pads and are designed for smaller sanders.
No, the pack contains three 75mm x 10mm interface pads only.
Replace the pad when the foam loses its elasticity, develops tears, or the hook-and-loop surface no longer holds the sanding disc firmly.
Check if the hook-and-loop face is clogged with sanding dust. Clean with compressed air or a soft brush.
Verify that the interface pad and the sanding disc are perfectly centered on the backing pad.
Reduce the amount of downward pressure applied; let the sander's weight and the orbital action do the work.
Installation is straightforward due to the standard hook-and-loop interface. Simply press the foam pad onto your sander's backing pad, then attach your preferred grit sanding disc to the face of the interface pad. Always ensure that the disc is centered to prevent vibrations caused by off-balance loads.
Compatibility: These pads fit most 75mm backing pads found on orbital and rotary sanders.
Care: To extend the life of your pads, avoid using excessive pressure, which can tear the foam structure. After use, gently tap the pad to remove dust. If the foam becomes saturated with dust or wood fines, clean it with low-pressure compressed air. Do not use harsh solvents as they can degrade the soft foam material.
