U-Pol Raptor Tintable Liner Kit - 1L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The U-Pol Raptor Tintable Liner Kit is an ideal solution for truck owners and automotive restorers looking to shield van floors or truck beds from harsh environmental damage. This 2K urethane coating provides a heavy-duty, protective layer that resists rust, corrosion, salt, and extreme temperature fluctuations while offering a customizable, aesthetically pleasing finish. While it is highly effective at creating a durable, scratch-proof surface, it requires precise mixing and preparation to ensure proper adhesion and longevity.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | RLT/REP-1 |
| Brand | U-Pol |
| Container Volume | 1L |
Extended Product Information
FAQs
Do I need a special spray gun to apply this?
Yes, a dedicated Raptor Schutz gun is recommended for the best texture control, though it can be applied via roller for smaller touch-up jobs.
Can I apply this directly over rust?
No. All loose rust must be removed, and the area should be treated with an anti-corrosive primer before applying the liner.
How long does it take to cure?
It is touch dry within an hour, but it typically requires 24 hours to reach a functional state and up to a week to achieve full chemical hardness.
What should I use to tint the liner?
You can add up to 10% automotive basecoat or single-stage paint to the tintable base to achieve your desired color.
Is this product heat resistant?
Yes, it is designed to withstand extreme temperature fluctuations without cracking or losing adhesion.
Troubleshooting
Coating is peeling shortly after application
This usually indicates inadequate surface preparation. Ensure the metal was sanded properly to create a mechanical key and was completely free of grease and dust before spraying.
Uneven texture or clumping
Verify the spray gun pressure and nozzle settings. Ensure the material was mixed thoroughly and not left sitting in the gun for too long, which can cause the product to begin curing.
Pros and Cons
Pros
- Superior resistance to extreme weather conditions
- Tintable to match any vehicle color scheme
- Provides a non-slip, textured finish for safety
- Excellent adhesion to various properly prepped surfaces
Cons
- Requires professional-grade surface preparation
- One-liter volume may be insufficient for large bed sizes
- Chemical composition requires proper ventilation and safety gear during application
Setup, Compatibility & Care
To ensure the best results, start by abrading the surface with 80-180 grit sandpaper to create a profile for adhesion. Thoroughly clean the surface with a degreaser to remove all dust and residues. When mixing, ensure the hardener is added in the correct ratio as specified on the product packaging.
- Application: Always apply in a well-ventilated area while wearing a respirator, gloves, and eye protection.
- Care: Allow the coating to fully cure before placing heavy objects in the treated area. For regular maintenance, use a mild detergent and a soft brush to remove dirt or debris; avoid harsh solvents that could degrade the finish over time.