Shopping.co.uk

Loops 6.35mm Stereo Male Jack Plug - Solder Connector

Loops 6.35mm Stereo Male Jack Plug - Solder Connector

This listing is for 2 x 6.35mm stereo audio connectors. These connectors can be soldered onto a su...

Best current price£7.69from OnBuy.com

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
OnBuy.com£7.69Visit shop

2X 6.35Mm 1/4" Stereo Male Jack Plug Solder Connector Speaker Audio Headphone Amp 5055538132926

Visit shop

All Offers

3 offers from £7.69 - £9.29

View price history by clicking the chart icon.

OnBuy.com2X 6.35Mm 1/4" Stereo Male Jack Plug Solder Connector Speaker Audio Headphone Amp 5055538132926
Free delivery in 1–3 days
£7.69
Visit shop
B&Q - 2X 6.35mm 1/4" Stereo Male Jack Plug Solder Connector Speaker Audio Headphone Amp
Free delivery in 1–3 days
£9.29
Visit shop

Product Information

Full details

This product is for audio professionals and hobbyists seeking to create custom audio cables. The key benefit is the ability to create durable, high-quality 6.35mm jack connections for various audio equipment. A potential caveat is that these are solder connectors, requiring basic soldering skills for installation. These connectors allow you to terminate cables with a standard 6.35mm (1/4 inch) stereo jack, suitable for keyboards, headphones, and other instruments.

All features

BrandLoops

Extended Product Information

FAQs

What does '6.35mm stereo' mean?

6.35mm refers to the physical size of the connector (also known as 1/4 inch). 'Stereo' indicates it has three connection points (Tip, Ring, Sleeve) to carry two independent audio channels (left and right) plus a common ground.

Do I need special tools to install these connectors?

Yes, you will need a soldering iron, solder, wire strippers, and potentially desoldering braid or a solder sucker for corrections.

Can I use these for mono signals?

Yes, you can use a mono cable (two conductors: tip and sleeve) and connect the tip conductor to both the Tip and Ring terminals of the plug, and the sleeve conductor to the Sleeve terminal. However, a dedicated mono plug would be more appropriate.

What is the maximum cable size these can accommodate?

These connectors can accommodate cables with an outer diameter of up to 7mm.

Are these connectors gold-plated or nickel-plated?

These connectors are nickel-plated.

How many connectors are included in this listing?

This listing is for 2 x 6.35mm stereo audio connectors.

Troubleshooting

No audio signal or intermittent signal

Check solder joints for cold joints or bridges. Ensure the correct wires are soldered to the Tip, Ring, and Sleeve terminals according to the stereo wiring standard. Verify cable integrity.

Hum or buzzing noise

Ensure the shield wire is properly connected to the Sleeve terminal. Check for any unintended ground loops or interference. Make sure solder joints are clean and not bridging connections.

Connector feels loose on the cable

Verify that the cable's outer diameter is within the 7mm limit. Ensure the strain relief is properly secured around the cable jacket to prevent strain on the solder connections.

Pros and Cons

Pros

  • Enables creation of custom-length audio cables.
  • Durable nickel-plated construction for longevity.
  • Versatile for various audio equipment like keyboards and headphones.
  • Secure solder connection ensures reliable signal transfer.

Cons

  • Requires soldering skills for installation.
  • Soldering process can be time-consuming.
  • Not a plug-and-play solution; requires DIY effort.

Setup, Compatibility & Care

Setup:

  1. Prepare your audio cable by stripping the outer jacket to expose the internal conductors (typically two signal wires and a shield).
  2. Thread the cable through the rear strain relief of the connector.
  3. Separate and tin the tip, ring, and sleeve conductors.
  4. Apply a small amount of solder to the corresponding terminals on the connector (Tip, Ring, Sleeve).
  5. Carefully solder each conductor to its designated terminal, ensuring no solder bridges between terminals.
  6. Secure the connector housing and strain relief.

Compatibility:

  • Compatible with any audio device featuring a 6.35mm (1/4 inch) stereo jack input or output.
  • Suitable for use with instruments, amplifiers, mixers, audio interfaces, headphones, and speaker systems.
  • Accommodates cables with an outer diameter up to 7mm.

Care:

  • Keep connectors clean and dry.
  • Avoid excessive force when plugging or unplugging cables.
  • Periodically check solder joints for integrity.

Price History

DatePrice
Visit shop