Urth Lens Mount Adapter Konica AR Lens to Sony E Camera

No, this adapter is for manual use only. It does not support autofocus or any other electronic functions between the lens and the camera.

While the camera's light meter might give a reading, it relies on electronic communication. For accurate exposures, it's best to use the lens's aperture ring and adjust your camera's shutter speed and ISO accordingly, or use an external light meter.

Most Konica AR mount lenses have an aperture ring directly on the lens. You will need to rotate this ring to your desired f-stop before shooting.

The 'light-sealed' design ensures that no stray light can enter the adapter between the lens and the camera body, which helps prevent internal reflections and maintain image quality.

Yes, it is designed to be compatible with all cameras featuring the Sony E mount, including both full-frame and APS-C sensor models.

You can use any lens that has a Konica AR mount. This allows you to adapt a wide range of vintage Konica lenses to your Sony E mount camera.

No, electronic lens stabilization features are not supported as this is a purely mechanical adapter.

Ensure no debris is present on the mounting surfaces of the lens, adapter, or camera. Realign the mounting marks carefully and try again.

Check that the adapter is fully twisted into its locked position. Ensure the camera's E-mount is clean and undamaged.

This adapter is manual and does not communicate electronically. If your camera requires a lens to be attached for certain modes, try setting your camera to 'Release Shutter Without Lens' or a similar manual mode setting.

The adapter does not communicate exposure information. You must manually set the aperture on the lens and adjust shutter speed or ISO on your camera based on your desired exposure. Use your camera's meter or an external light meter.