Best current price£153.22from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£153.22Visit shop Schneider Electric Tesys Gv2p32 Motor Circuit Breaker 24-32A - Gv2p32
Visit shop4 offers from £153.22 - £344.58
View price history by clicking the chart icon.
The Schneider Electric GV2P32 is a three-pole motor circuit breaker designed for robust protection of three-phase motors up to 15kW at 400V. It's ideal for industrial automation, control cabinets, and machinery applications where reliable safeguarding against overloads and short circuits is critical. While it offers excellent multi-standard certifications and a high breaking capacity, users should note its specific operating temperature range and ensure proper installation for optimal performance.
| Series | GV2P |
|---|---|
| Model Part Number | GV2P32 |
| Brand | Schneider Electric |
The thermal protection is adjustable within a range of 24A to 32A.
The magnetic trip setting is fixed at approximately 13 times the nominal current (13xIn).
While designed for three-phase applications, its protection characteristics might be adaptable for specific single-phase setups, but always consult the detailed datasheet and local regulations.
It has a breaking capacity of 50kA at 400V.
After the fault condition is cleared, the rotary handle can be used to reset the breaker. Move it to the 'OFF' position and then to the 'ON' position.
Yes, the thermal element provides overload protection, and the magnetic element provides short-circuit protection, integrated into a single unit.
The operating temperature range for the GV2P32 is from -20°C to +60°C.
Check if the thermal setting is too low for the motor's actual load or if there's an underlying motor issue (e.g., bearing wear). Verify connections are tight.
Ensure the breaker is correctly wired and the fault current is sufficient to activate the magnetic trip mechanism. Verify the breaker's rating is appropriate for the system.
Inspect for any obstructions around the handle mechanism. Ensure the breaker is properly mounted and not under mechanical stress. Clean and lubricate sparingly if necessary, following manufacturer guidelines.
De-energize the system. Carefully tighten screw terminals. If corrosion is severe, clean terminals with an appropriate contact cleaner or replace the breaker if damage is significant.
Setup:
Compatibility:
Care:
