Best current price£92.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£92.00Visit shop B&Q - 3 Port Underfloor Heating Manifold With Pipe Connections Copper 15mm X 3/4 Ball Valves With Thermometers Psw Tradesuppliers Ltd
Visit shop14 offers from £92.00
View price history by clicking the chart icon.
This 3-port underfloor heating manifold from Wärmer System is designed for homeowners and installers seeking efficient water distribution and precise zone control for their underfloor heating systems. Its key benefit is simplified installation with a pre-mounted bracket and compatibility with standard euro cone fittings, enabling quick integration. A potential consideration is that it is a component within a larger system and requires professional plumbing knowledge for optimal setup and performance.
| Model Part Number | E101W+(D7*6)+(E128+E129) |
|---|---|
| Brand | Wärmer System |
This manifold features 3/4 inch threads, designed to be compatible with standard euro cone fittings. You will need the correct euro cone insert for your specific pipe diameter (e.g., 12mm, 15mm).
While installation is straightforward with standard plumbing tools, it is highly recommended to have a qualified plumber or heating engineer install the manifold to ensure correct connections, system balancing, and adherence to safety standards.
It's good practice to check the system pressure regularly, especially during the heating season. A monthly check is generally sufficient, but monitor it more closely after any maintenance or if you suspect an issue.
This manifold is specifically designed for underfloor heating systems and is not intended for domestic hot water distribution.
The automatic air vent continuously expels air that may accumulate in the underfloor heating loops. This is crucial for maintaining efficient heat transfer and preventing noise or poor performance caused by air pockets.
Connect a hose to the filling/drain-off valve and open the valve to allow water to drain from the system. Ensure the system is isolated from the main water supply before draining.
Basic care involves keeping it clean and ensuring the air vent and drain valve are functioning. Periodic professional system checks are advised.
Ensure all connections, especially the euro cone fittings, are securely tightened. Check O-rings or seals for damage and replace if necessary. Re-tighten fittings with appropriate tools.
Check if the flow rate to each zone is correctly balanced. Ensure the automatic air vent is functioning and no air is trapped in the loops. Verify that the thermostat for each zone is set correctly and the actuator is opening/closing as expected.
Check for leaks in the manifold or pipework. If no leaks are found, the system may need to be repressurized using the filling/drain-off valve. Refer to your boiler or heating system manual for correct pressure levels.
The air vent may be blocked or faulty. Gently try to manually operate the vent (if possible) or unscrew and clean it. If the issue persists, the vent may need replacement.
Setup:
Compatibility:
Care:
