Best current price£67.49from eBay
Shopping.co.uk recommended and popular offers
eBay£67.49Visit shop OD/1960HO56 OMP Racing Steering Wheel Hub Boss Kit (also fits Sparco Wheels)
Visit shop14 offers from £67.49 - £89.74
View price history by clicking the chart icon.
This OMP Steering Wheel Boss Kit is designed for BMW 3 Series (E36) and 8 Series (E31) owners looking to install an aftermarket steering wheel. It offers a direct fit for OMP wheels and compatibility with other popular brands, retaining the original steering wheel position for a comfortable driving experience. A key caveat is the need for extra caution and potentially professional advice when installing on vehicles equipped with airbags.
| Model Part Number | OD0-1960-BM25 |
|---|---|
| Brand | OMP |
This particular OMP Steering Wheel Boss Kit is designed for the BMW 3 Series (E36) and 8 Series (E31). Always confirm the compatibility for your exact vehicle year and model before purchasing.
Yes, this boss kit features a 6 x 70mm PCD bolt pattern which is compatible with most Momo, Sparco, OMP, and other popular aftermarket steering wheels.
Basic installation is mechanical. However, dealing with airbag systems requires significant caution and adherence to specific safety procedures. If you have any doubts, professional installation is highly recommended.
No, this boss kit is designed to retain the original steering wheel position, meaning it should not alter the steering wheel's reach or rake.
The kit is supplied with the boss kit itself and the necessary fitting screws for installation.
Use a soft, slightly damp cloth to wipe down the boss kit. Avoid harsh chemicals or abrasive materials.
The PCD (Pitch Circle Diameter) of the bolt pattern on this boss kit is 70mm.
Ensure the boss kit is fully seated on the steering column splines and that the correct boss kit for your vehicle model was used. Recheck installation steps.
Verify the horn wiring connection to the steering wheel and boss kit. Check if the horn ground wire is properly connected.
Double-check that all mounting bolts securing the steering wheel to the boss kit are tightened to the correct torque specification.
This typically indicates an issue with the airbag system's electrical connection. It is crucial to have this checked by a qualified professional immediately. Do not ignore airbag warning lights.
Compatibility: This boss kit is specifically designed for BMW 3 Series (E36) and 8 Series (E31) models. It is compatible with steering wheels featuring a 6 x 70mm PCD bolt pattern, including OMP, Momo, Sparco, Motacorsa, Sabelt, and Mountney M range. Ensure your vehicle is listed for this specific boss kit variant.
Setup: Installation involves removing the original steering wheel and carefully disconnecting any airbag components if present, following the manufacturer's specific instructions. The boss kit is then mounted to the steering column splines, followed by attaching the new steering wheel to the boss kit. Ensure all bolts are torqued to the manufacturer's specifications. Important: If your vehicle is equipped with an airbag, extreme caution is advised. Consult a professional mechanic if you are unsure about any step.
Care: Clean the boss kit with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which can damage the finish. Periodically check that all bolts remain securely fastened.
