Best current price£102.35from eBay
Shopping.co.uk recommended and popular offers
eBay£102.35Visit shop Oil Filter Air BMC race-fm01119race for Moto Spare Parts Accessories Pieces
Visit shop2 offers from £102.35 - £110.99
View price history by clicking the chart icon.
The BMC Racing Air Filter (FM01119RACE) is designed for motorcycle enthusiasts and competitive riders looking to optimize their engine's breathing and throttle responsiveness. By providing superior airflow compared to stock paper filters, it helps unlock more consistent power output across the rev range, though it requires periodic cleaning and oiling to maintain its peak performance levels.
| Model Part Number | FM01119RACE |
|---|---|
| Brand | BMC |
No. Using compressed air can tear the filter media and compromise its ability to trap small particles.
Maintenance intervals depend on riding conditions, but generally, it should be checked every 5,000 to 10,000 miles or sooner if riding in very dusty areas.
While the filter provides better airflow, minor adjustments usually do not require an ECU re-map, though it is recommended if you have other performance modifications.
Yes, BMC racing filters come pre-oiled and are ready for installation immediately.
Without the correct filter oil, the filter will not be able to catch fine dust particles, which could lead to accelerated engine wear.
Ensure the filter is seated correctly with no air leaks around the perimeter and check that the airbox lid is fully sealed.
Clean the filter using a dedicated BMC cleaning kit and apply fresh filter oil; consider more frequent intervals if riding in dusty conditions.
To install, remove your motorcycle's seat and fuel tank (as required by your specific model manual) to access the airbox. Open the airbox housing, remove the existing filter, and ensure the internal housing is clean of dust or debris. Insert the BMC Racing Air Filter, ensuring a snug fit with no gaps around the edges.
For maintenance, use the official BMC cleaning kit. Do not use compressed air to clean the filter, as this can damage the filtering media. After cleaning and allowing the filter to dry completely, apply a light, even coat of BMC filter oil to ensure maximum filtration efficiency before reinstallation.
