VEVOR Fuel Transfer Pump - 20GPM - 12V
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The VEVOR Fuel Transfer Pump is designed for professionals and agricultural users who need a robust, portable solution for transferring diesel, gasoline, kerosene, and ethanol blends in the field. Powered by a 12V DC source, this high-performance unit delivers an impressive 20 GPM flow rate, making quick work of large tank transfers. While it offers excellent durability with its cast iron and aluminum construction, it is intended strictly for mobile or field applications where a 12V power source is readily accessible.
All features
| Model Part Number | F12V14HP21GPM1XXCV9 |
|---|---|
| Brand | VEVOR |
Extended Product Information
FAQs
Can I use this pump with a standard wall outlet?
No, this is a 12V DC pump intended for battery power. Using an AC/DC converter is not recommended unless it is rated for the high amperage draw of the motor.
What is the maximum lift height?
The pump has a suction lift of 9.8 feet and a delivery discharge height of 26.2 feet.
Is the pump explosion-proof?
While designed for fuels, always operate in well-ventilated areas away from open flames and sparks, adhering to standard fuel safety protocols.
Does it include a flow meter?
This specific model includes the pump, nozzle, hoses, and suction pipe; a separate mechanical flow meter can be added to the output line if volume tracking is required.
How do I maintain the automatic nozzle?
Keep the sensing port on the nozzle clear of dirt and ensure the nozzle is not dragged on the ground to prevent damage to the automatic shut-off mechanism.
Troubleshooting
Pump motor hums but no fuel is flowing
Check the suction pipe for proper immersion and ensure there are no air leaks at the intake connections.
Flow rate is significantly lower than 20 GPM
Inspect the suction pipe for clogs or debris and check the power source to ensure the battery provides a full 12V charge.
Nozzle shuts off immediately
Verify that the tank vent is open and that the nozzle is not restricted by debris or a sharp kink in the hose.
Pros and Cons
Pros
- High flow rate of 20 GPM for efficient transfers
- Wide range of fuel compatibility including ethanol and methanol blends
- Rugged build quality using cast iron and aluminum
- Generous 18-foot power cable for easier reach
- Automatic nozzle prevents messy drips and overfilling
Cons
- Requires a 12V DC power source, not for direct AC wall outlet use
- Heavier due to cast iron components compared to plastic pumps
- Not intended for non-liquid or high-viscosity non-fuel materials
Setup, Compatibility & Care
To set up, securely attach the telescopic suction pipe to the pump intake and place it into your fuel source. Connect the outlet hose to the discharge port, ensuring all threaded connections are tight to prevent leaks. Attach the power cable clips to your 12V battery, observing correct polarity (Red to Positive, Black to Negative).
Care Instructions:
- Periodically inspect the hose for cracks or abrasions.
- Ensure the pump remains dry and shielded from excessive moisture when not in use.
- Clean the nozzle tip regularly to prevent debris buildup that could trigger the automatic shut-off prematurely.
- Always flush the system if switching between different types of fuel to avoid contamination.