Bg White 20A 2 Way 1 Gang Light Switch, Pack Of 5 - White
Best current price£6.50from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£6.50Visit shop B&Q - White 20A 2 Way 1 Gang Light SwitchPack Of 5
Visit shopB&Q£6.50Visit shop One Offer
1 offer from £6.50
View price history by clicking the chart icon.
Product Information
Full details
This pack of five British General white 20A single light switches is ideal for homeowners and electricians managing lighting in multiple rooms or areas. Its primary benefit is the **2-way switching capability**, allowing for convenient control of a single light from two separate locations, enhancing usability in stairwells or large rooms. A minor consideration is that each switch controls only one light circuit.
All features
| Colour | White |
|---|---|
| Brand | BG |
Extended Product Information
FAQs
What does '2 Way 1 Gang' mean?
'1 Gang' means the switch controls one circuit (one light). '2 Way' means it can be used in a pair with another 2-way switch to control the same light from two different locations.
Can I use this switch to control two lights?
No, this is a 1 Gang switch, meaning it is designed to control a single light or light circuit.
Do I need special wiring for 2-way switching?
Yes, 2-way switching requires specific wiring between the two switches and the light fitting. It is recommended to have this installed by a qualified electrician.
How do I clean the anti-microbial surface?
Clean with a soft, damp cloth. Avoid abrasive cleaners. The anti-microbial properties are inherent to the material and do not require special cleaning agents.
Is this switch suitable for outdoor use?
No, this switch is designed for indoor use only. It does not have an IP rating for protection against water or dust ingress.
What is the warranty period?
Please refer to the product packaging or manufacturer's website for specific warranty details, as warranty periods can vary.
Can I replace an old single-gang switch with this one?
If your old switch was a single-gang and controlled one light, and you only need single-location control, you can use this switch. If you intend to use the 2-way functionality, you will need to rewire it appropriately and potentially add a second switch.
Troubleshooting
Switch not operating the light
Verify that power is supplied to the circuit and that the wiring connections are secure and correct for 2-way switching if applicable. Consult an electrician if unsure.
Light flickers or dims intermittently
Check all wiring connections for tightness. Ensure the light bulb or fixture is compatible and not nearing the end of its lifespan. The switch itself is unlikely to be the cause if it's new.
Switch feels loose or stiff
Ensure the switch is properly secured to the wall box. If stiff, check for any obstructions or debris around the mechanism, though this is uncommon with new switches.
Discolouration or fading observed over time
While designed to resist fading, prolonged exposure to direct, intense sunlight can affect any plastic material. Ensure the switch is not in constant direct sunlight if maintaining pristine appearance is critical.
Pros and Cons
Pros
- Versatile 2-way switching for convenient control.
- Durable materials resist fading, discolouration, and scratches.
- Anti-microbial properties enhance hygiene.
- Classic, unobtrusive design complements various decors.
- Cost-effective pack of five for multiple installations.
Cons
- Each switch controls only one light.
- Requires specific wiring for 2-way functionality.
- 20A rating may be overkill for some very low-load lighting circuits.
- White colour family might not match all interior design schemes.
Setup, Compatibility & Care
Setup: Installation should be performed by a qualified electrician following local wiring regulations. Ensure the power is switched off at the mains before attempting installation. For 2-way switching, two such switches are required, with appropriate wiring connecting them to the light fixture.
Compatibility: These switches are designed for standard UK/European mains voltage and wiring systems. They are compatible with most standard light fittings and fixtures rated for 20A circuits.
Care: To clean, switch off the power supply. Use a soft, damp cloth to wipe the surface. Avoid using abrasive cleaners or solvents, which can damage the finish. The anti-microbial properties do not require special cleaning agents but are maintained through regular dusting and wiping.