Best current price£37.25from eBay
Shopping.co.uk recommended and popular offers
eBay£37.25Visit shop 2x Brake Discs Pair Vented Front 260mm 22994 Febi Set A1684210212 A1684210812
Visit shop10 offers from £37.25 - £69.09
View price history by clicking the chart icon.
This guide is for vehicle owners and mechanics seeking high-quality front brake disc replacements. The key benefit is the restoration of reliable braking performance with OE-quality parts from Febi. A potential caveat is the need for professional installation to ensure safety and proper function. This product features a pair of 2x vented brake discs for the front axle, with a 260mm diameter, manufactured by Febi, a renowned German automotive parts supplier. They are coated, internally vented, and designed as a direct replacement.
| Model Part Number | 22994 |
|---|---|
| Brand | Febi |
No, these brake discs are specifically designed for vehicles that require a 260mm vented front brake disc and are a direct replacement for OE part number 17747. Always verify compatibility with your vehicle's specifications before purchasing.
Internally vented brake discs have cooling vanes or passages within the disc rotor. These allow air to flow through the disc, helping to dissipate heat more effectively, which reduces the risk of brake fade during heavy use.
Yes, it is standard practice and highly recommended to replace brake discs in pairs on the same axle (both left and right) to ensure balanced braking performance and even wear.
Bedding-in helps mate the brake pads to the new discs. A common method involves performing several moderate stops from around 50-60 mph down to 10-20 mph without coming to a complete halt, followed by a period of driving without braking to allow them to cool. Consult your installer or a vehicle-specific guide for detailed instructions.
The minimum thickness for these Febi 22994 brake discs is 19.4mm. Discs should be replaced if they wear down to or below this thickness.
While technically possible, brake system work is critical for safety. It is strongly recommended that these brake discs be installed by a qualified mechanic or a competent individual who understands automotive brake systems and can adhere to manufacturer torque specifications.
Warranty information is typically provided by the retailer at the time of purchase and is subject to proper installation and use. Please refer to the retailer's warranty policy for details.
This can indicate uneven wear or warping of the brake discs. Ensure the discs were installed correctly and torqued to specification. If the issue persists, the discs may need replacement.
Could be due to worn brake pads, debris between the pad and disc, or issues with the disc surface. Inspect brake pads and ensure the disc surface is clean and free from damage. Ensure new pads are compatible.
Ensure the brake fluid is in good condition and the system is not leaking air. Verify the brake pads are compatible and not excessively worn. The vented design helps dissipate heat, but extreme conditions can still lead to fade if other components are compromised.
Surface rust on new, coated brake discs is normal, especially if exposed to moisture during shipping or storage. This will typically wear off after the initial bedding-in procedure.
Setup:
These brake discs are intended as a direct replacement for the original part number 17747. Installation should only be performed by a competent individual or qualified mechanic. This typically involves removing the wheel, caliper, and old brake disc, then fitting the new disc and reassembling the braking system. It is crucial to follow the vehicle manufacturer's torque specifications for all fasteners.
Compatibility:
Care:
