Brake Disc Front - Febi Bilstein - 26095

The Febi Bilstein 26095 is designed as a high-quality original equipment replacement for standard driving conditions. For dedicated performance or track use, specialized performance brake components may be more appropriate.

Internally ventilated brake discs have air channels within the disc structure. This design allows air to flow through the disc, helping to dissipate heat generated during braking, which improves performance and reduces the risk of brake fade.

It is recommended to inspect brake discs during routine vehicle maintenance, typically every 6 months or 12,000 miles (20,000 km), or whenever you have your brake pads replaced.

Yes, it is standard practice and highly recommended to replace brake discs in pairs on the same axle (both front or both rear) to ensure balanced braking performance and prevent uneven wear.

The minimum recommended thickness for the Febi Bilstein 26095 brake disc is 37 mm. Discs below this specification should be replaced.

Part numbers are not always stamped directly onto the brake disc itself. You will typically need to refer to your vehicle's service manual, the original part's packaging, or consult with a parts specialist using your vehicle's VIN.

This can indicate a warped disc or uneven pad material transfer. Ensure the disc was installed correctly with proper torque and consider a professional inspection. Resurfacing or replacement may be necessary.

Could be due to worn brake pads, debris between pad and disc, or improper bedding-in. Inspect brake pads for wear and clean the braking surfaces. If noise persists, consult a mechanic.

Check brake fluid level and condition, inspect pads for wear, and ensure the brake disc is not excessively worn or contaminated. Air in the brake lines can also cause this; bleeding the brakes may be required.