Best current price£74.12from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£74.12Visit shop Schneider Electric Harmony Pendant Pushbutton Box Complete - Xaca2713
Visit shop3 offers from £74.12 - £171.73
View price history by clicking the chart icon.
This Schneider Electric Harmony pendant pushbutton box (XACA2713) is designed for industrial applications requiring safe and precise control of single-speed hoist motors. It offers operators a robust and ergonomic interface with dedicated buttons for lifting and lowering, plus a critical emergency stop function, ensuring enhanced operational safety. A key consideration is its fixed configuration, meaning customization for multiple speeds or complex functions is not possible with this specific model.
| Series | Harmony XAC |
|---|---|
| Model Part Number | XACA2713 |
| Brand | Schneider Electric |
The rated operation current (Ie) at AC-15, 600V is 3A.
No, this specific model is designed for single-speed motor control only.
IP65 indicates that the enclosure is protected against dust ingress and is resistant to low-pressure water jets, making it suitable for industrial environments.
The ø 30mm emergency stop button is a latching type. It typically needs to be twisted or pulled to reset after being activated.
The housing is made of durable plastic.
The unit can operate reliably within a temperature range of -25°C to +70°C.
It has 2 command positions for the lift and lower functions, plus a dedicated position for the emergency stop button.
Verify that the control system is powered and that all wiring connections are secure and correct according to the wiring diagram. Check the circuit breaker or fuse for the control circuit.
Inspect the corresponding push button and its wiring for loose connections or damage. Ensure the button is actuating correctly and not obstructed. Check the internal contacts for wear.
This is a critical safety issue. Immediately cease operation and check the wiring to the emergency stop button and its integration into the safety circuit. Ensure the button is properly latched and that the NC contact is closing when pressed. If unsure, consult a qualified electrician.
Check for any debris or foreign material around the buttons. Ensure the operating environment is within the specified temperature range. If stiffness persists, the unit may require servicing.
Setup: This pushbutton box requires direct wiring into a compatible control panel or motor starter. Ensure all power is disconnected before installation. Connect the 'Lift' button to the motor's forward contactor, the 'Lower' button to the reverse contactor, and the emergency stop button to the main safety circuit. Refer to the wiring diagrams provided with the unit for precise connections. The unit is designed for a rated operation current Ie at AC-15, 600V of 3A.
Compatibility: Suitable for controlling single-speed AC motors. Verify voltage and current ratings match your specific motor control system.
Care: Keep the housing clean using a slightly damp cloth. Avoid using abrasive cleaners or solvents. Regularly inspect the buttons and housing for any signs of damage. Ensure the emergency stop button operates freely and latches/unlatches correctly.
