Plumbright Street Elbow 90 Degree - 8mm
Best current price£0.80from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£0.80Visit shop Plumbright Endfeed Street Elbow 90 Degree 8Mm 30024801
Visit shopCity Plumbing GB£0.80Visit shop One Offer
1 offer from £0.80
View price history by clicking the chart icon.
City Plumbing GBPlumbright Endfeed Street Elbow 90 Degree 8Mm 30024801
Free delivery in 1–3 days
£0.80
Visit shop
Product Information
Full details
This guide is for plumbers and DIY enthusiasts working with 8mm copper pipe systems. The Plumbright Street Elbow offers a high-quality, certified solution for creating a 90-degree change in pipe direction using a reliable solder joint. While its end-feed design is cost-effective and straightforward, it requires proper soldering technique for a secure, leak-free connection.
All features
| Model Part Number | 30024801 |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
What does 'Street Elbow' mean?
A 'street elbow' is a type of elbow fitting that has a male thread on one end and a female socket on the other, or in this case, one end designed to connect directly to a pipe (like a standard elbow) and the other end designed to connect directly to another fitting or pipe stub with a solder joint, eliminating the need for an additional coupling.
What is EN1254-1?
EN1254-1 is the European standard that specifies requirements for copper and copper alloy press and solder fittings for use in pipe systems for water and heating.
What does WRAS approved mean?
WRAS (Water Regulations Advisory Scheme) approval means the product has been rigorously tested and complies with the Water Supply (Water Fittings) Regulations 1999 in England and Wales, and the Water Byelaws 2000 Scotland. This ensures it is safe for use with drinking water.
Can I use this with push-fit fittings?
No, this is an end-feed fitting designed specifically for soldering. It is not compatible with push-fit or compression jointing systems.
What tools do I need to install this?
You will need a pipe cutter, emery cloth or pipe cleaning brush, flux, capillary solder wire, a blowtorch, and a damp cloth for cleaning.
How long will this fitting last?
When installed correctly in a suitable system, copper fittings like this are designed for a long service life, often exceeding 50 years, due to the inherent durability of copper.
Troubleshooting
Solder not flowing into the joint
Ensure the joint is clean and properly fluxed. The fitting may not be heated sufficiently or evenly. Apply heat to the fitting body, not directly to the solder.
Leak after soldering
The joint may not have been heated sufficiently, or there may have been movement during cooling. The joint will need to be de-soldered, cleaned, and re-soldered.
Fitting appears discolored or tarnished
This is normal oxidation of copper and does not affect performance. Ensure fittings are clean before soldering.
Pros and Cons
Pros
- Ensures a precise 90-degree turn in pipework.
- High-quality copper construction offers durability.
- Kitemark and WRAS certifications guarantee safety and compliance.
- Cost-effective joining method when using solder.
- Reliable and neat joints can be achieved with correct installation.
Cons
- Requires soldering skills and equipment for installation.
- Not suitable for push-fit or compression jointing systems.
- Potential for leaks if not soldered correctly.
- Limited to 8mm pipe size.
Setup, Compatibility & Care Instructions
Setup:
- Preparation: Ensure the end of the 8mm copper pipe and the inside of the fitting socket are clean and free from oxidation. Use appropriate pipe cleaning tools (e.g., emery cloth, internal reamer).
- Flux Application: Apply a thin, even layer of water-soluble soldering flux to both the pipe end and the inside of the fitting socket.
- Assembly: Insert the pipe fully into the fitting socket.
- Heating: Apply heat evenly to the underside of the fitting socket using a suitable torch. Move the heat source around the joint to ensure uniform temperature.
- Soldering: Once the fitting reaches the correct temperature (indicated by flux bubbling or a slight color change in the copper), introduce capillary solder wire to the joint. The solder should be drawn into the gap via capillary action.
- Cooling: Allow the joint to cool naturally without disturbing it. Do not attempt to move or stress the joint while it is cooling.
- Cleaning: Once cool, wipe away any excess flux residue with a damp cloth.
Compatibility:
- This fitting is specifically designed for use with 8mm nominal bore copper pipe conforming to relevant British or European standards.
- It is suitable for use in potable water systems (WRAS approved) and central heating systems.
Care:
- Once installed, copper fittings require minimal ongoing care. Regularly inspect for any signs of corrosion or leaks. Ensure that surrounding pipework is adequately supported to prevent undue stress on the joint.