Best current price£174.05from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£174.05Visit shop Holley Easy Level Universal Floatless Fuel Level Sender
Visit shop3 offers from £174.05
View price history by clicking the chart icon.
The Holley Easy Level Universal Floatless Fuel Level Sender is designed for automotive enthusiasts and custom builders who need a reliable and accurate way to monitor fuel levels with aftermarket gauges. Its key benefit is the revolutionary laser technology, which eliminates traditional float mechanisms, simplifying installation and calibration for any tank depth. A primary consideration is its compatibility, as it outputs a PWM signal and is not suitable for OEM Ohm-only inputs.
| Model Part Number | 19-250-1 |
|---|---|
| Brand | Holley |
No, this sender is designed for aftermarket gauges and outputs a PWM signal. It is not compatible with OEM gauges that require an Ohm-only input.
The Holley Easy Level sender can measure fuel tank depths from 4 inches (102mm) up to 38 inches (965mm).
Calibration is done by programming the sender with the precise depth of your fuel tank. Refer to the product manual for specific programming instructions.
Slosh compensation refers to the ability to adjust the sender's sensitivity to prevent the fuel gauge needle from bouncing erratically when the fuel moves in the tank during driving.
Yes, the sender is supplied with a rubber sealing gasket and the necessary mounting hardware for installation.
The product description specifies it is a 'fuel level sender' and does not restrict fuel type, but it's always recommended to confirm compatibility with specific fuel types if not using gasoline, or consult the manufacturer.
Verify that the sender is properly calibrated to the exact tank depth. Adjust the sensitivity dip switches to compensate for fuel slosh. Ensure the gauge itself is compatible with the sender's PWM output signal.
Double-check the 12V power and ground connections. Ensure they are secure and that the 12V source has power. Confirm the signal wire is correctly connected to the fuel gauge input.
Re-calibrate the sender, ensuring you have accurately measured and entered the tank depth. Check the wiring for any potential shorts or breaks.
Setup: The sender mounts to the fuel tank using the common SAE 5-bolt pattern. Ensure the tank surface is clean before installing the provided rubber gasket. Connect the three wires: 12V power, ground, and the signal wire to your aftermarket fuel level gauge. Calibration involves programming the sender with the exact depth of your fuel tank using its internal settings. Adjust the sensitivity dip switches as needed to account for fuel slosh.
Compatibility: This sender is designed for use with aftermarket fuel level gauges that accept a PWM signal. It is *not* compatible with OEM gauges that rely solely on an Ohm-based input. The sender is compatible with fuel tanks ranging from 4" (102mm) to 38" (965mm) in depth.
Care: As the unit has no moving parts, it requires minimal physical care. Keep the sender's mounting area clean. Ensure electrical connections are secure and protected from the elements. No regular maintenance is typically required beyond ensuring proper installation.
