ATEK Sound Proofing Panels - 72 Pack - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The ATEK Sound Proofing Panels are designed for content creators, office professionals, and homeowners seeking to improve audio clarity and reduce room echo. By utilizing high-density material, these panels effectively dampen reverberation in spaces like home studios and meeting rooms; however, it is important to note that while they excel at acoustic treatment, they are not designed to provide total soundproofing against external noise transmission through walls.
All features
| Model Part Number | 5060955534147 |
|---|---|
| Brand | ATEK |
Extended Product Information
FAQs
Will these stop my neighbors from hearing me?
No. These are acoustic treatment panels meant to absorb sound inside a room, not soundproofing barriers meant to block sound transmission through walls.
Can I cut these panels to fit specific areas?
Yes, they can be easily cut using a sharp utility knife and a straight edge to fit corners or irregular wall spaces.
Do I need to buy extra glue?
No, the panels come with pre-applied self-adhesive backing sufficient for most flat, indoor wall surfaces.
How many panels are in a pack?
This product comes in a 72-pack.
Can these be installed on ceilings?
Yes, they can be installed on ceilings to reduce overhead reflection, provided the ceiling surface is clean and smooth.
Troubleshooting
Panel is peeling off the wall
Ensure the wall was cleaned with isopropyl alcohol before installation; if the surface is porous, consider adding a small amount of extra spray adhesive.
Wall surface damaged during removal
Apply gentle heat with a hairdryer to soften the adhesive before slowly peeling the panel away to minimize paint or drywall paper damage.
Pros and Cons
Pros
- Tool-free, peel-and-stick installation process
- Effective at reducing flutter echo and reverberation
- Sleek, modern design improves room aesthetics
- Lightweight and easy to trim for custom spacing
- Comprehensive 72-pack coverage
Cons
- Not intended for blocking sound transmission between rooms
- Self-adhesive may be difficult to remove without damaging drywall
- Limited to white color option only
- Requires a clean, flat surface for proper adhesion
Setup, Compatibility & Care
Installation is straightforward: ensure your wall surface is clean, dry, and free of dust or oils. Peel the backing off the adhesive and press firmly against the wall for at least 10 seconds to ensure a strong bond. These panels are compatible with drywall, painted wood, and smooth metal surfaces; they are not recommended for textured walls or wallpaper as the adhesive may cause tearing upon removal. For cleaning, lightly dust the panels with a microfiber cloth or use a vacuum with a soft brush attachment. Avoid using wet cleaning agents, as moisture can damage the acoustic integrity of the panel material.