Makita Palm Sander - BO4555

For hook and loop, simply peel off the old paper and press the new paper onto the base. For clamp grip, release the clamps, remove the old paper, insert the new paper, and secure with the clamps.

It uses standard 1/4 sheet sandpaper (114 x 140 mm) or compatible hook and loop sandpaper.

Empty the dust bag frequently to maintain effective dust collection, typically after each use or when the bag is about half full.

While suitable for small to medium-sized projects, it may not be ideal for heavy-duty, large-scale sanding due to its 200W motor.

Always wear safety glasses and a dust mask while sanding. Ensure the work area is well-ventilated.

Replacement parts can be found through Makita authorized dealers or online retailers.

Use a damp cloth to wipe down the exterior of the sander. Avoid using solvents or immersing the sander in water.

Yes, register online for a 3 year guarantee.

Check the power cord and outlet. Ensure the switch is turned on.

Replace the sandpaper with a fresh sheet. Make sure you are applying adequate pressure, but not too much, as this can impede performance. Ensure the dust bag is not full.

Check the sandpaper for proper attachment and alignment. If using hook and loop sandpaper, ensure it is firmly secured. Check the base for damage.

Empty the dust bag. Check the dust extraction holes and the dust bag for blockages. Make sure that the dust bag is properly connected.