Shopping.co.uk

SecureFix Direct Folded Straining Eyebolts - M8 x 250mm - Zinc Plated - Pack of 10

SecureFix Direct Folded Straining Eyebolts - M8 x 250mm - Zinc Plated - Pack of 10

This pack contains 10 M8 x 250mm Zinc Plated Folded Straining Eyebolts, complete with nuts and was...

Best current price£9.95from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£9.95Visit shop

B&Q - X10 M8 X 250mm Zinc Plated Folded Straining Eyebolts Nut & WasherWire Support Fencing Straining

Visit shop

All Offers

3 offers from £9.95

View price history by clicking the chart icon.

B&QB&Q - X10 M8 X 250mm Zinc Plated Folded Straining Eyebolts Nut & WasherWire Support Fencing Straining
Free delivery in 1–3 days
£9.95
Visit shop
eBayFolded Straining Eyebolts Washer and Nut x10 M8 250MM (Zinc Plated Wire Support)
Free delivery in 1–3 days
£9.95
Visit shop
OnBuy.comFolded Straining Eyebolts Washer And Nut X10 M8 250Mm (Zinc Plated) 600988496644
Free delivery in 1–3 days
£9.95
Visit shop

Product Information

Full details

This guide is for DIY enthusiasts, landscapers, and construction professionals who need a reliable solution for tensioning wires and securing loads. The SecureFix Direct M8 x 250mm Folded Straining Eyebolts offer excellent corrosion resistance and a strong M8 thread for secure fastening. A key benefit is their robust construction, ensuring longevity in outdoor applications. However, users should note that while versatile, they are specifically designed for tensioning applications and may not be suitable for lifting heavy objects directly.

All features

ColourSilver
Model Part NumberSFFE0810
BrandSecureFix Direct

Extended Product Information

FAQs

What is the primary use for these eyebolts?

These eyebolts are primarily designed for straining fencing wire, creating anchor points for ropes or cables, and general tensioning applications. They are not intended for lifting heavy objects.

What material are the eyebolts made of?

They are made of steel with a zinc-plated finish for corrosion resistance.

Do I need any special tools to install them?

You will typically need a wrench to tighten the nut. A drill is required to create a pilot hole for mounting into solid surfaces like wood or masonry.

Can these be used outdoors?

Yes, the zinc-plated finish provides good resistance to rust and corrosion, making them suitable for outdoor use.

What is the weight capacity of these eyebolts?

The product information does not specify a weight capacity. They are designed for tensioning applications, not for direct load-bearing or lifting. Always ensure the mounting surface can handle the applied tension.

What does 'M8 x 250mm' refer to?

'M8' refers to the metric thread size, indicating a diameter of approximately 8mm. '250mm' refers to the overall length of the eyebolt.

Are the nuts and washers included?

Yes, each eyebolt in the pack of 10 comes complete with corresponding nuts and washers.

Troubleshooting

Eyebolt spins without tightening

Ensure the mounting surface is solid enough to grip. For thinner materials, use the nut and washer on the opposite side. If mounting into wood, ensure the pilot hole is not too large, or the wood is too soft.

Difficulty screwing eyebolt into wood

Drill a pilot hole slightly smaller than the thread diameter. Ensure the pilot hole is straight and deep enough.

Rust or corrosion forming on the surface

This is a sign of the zinc plating wearing or being exposed. Clean the area and consider applying a rust-inhibiting paint or lubricant if the corrosion is minor and does not compromise structural integrity. For severe corrosion, replacement may be necessary.

Nut is difficult to tighten

Ensure the threads on both the eyebolt and the nut are clean and free from debris. A small amount of lubricant on the nut's threads can help.

Pros and Cons

Pros

  • Durable zinc-plated finish offers excellent rust and corrosion protection.
  • Included nuts and washers simplify installation.
  • Robust M8 thread provides a strong and secure connection point.
  • Generous 250mm length is suitable for various tensioning needs.
  • Folded eye design is optimized for straining wires effectively.
  • Supplied in a convenient pack of 10 for multiple uses.

Cons

  • Not designed for overhead lifting applications.
  • The 250mm length might be excessive for very small projects.
  • Requires appropriate tools for installation (e.g., wrench, drill).
  • Zinc plating can wear down over extended periods of extreme abrasion.
  • Limited to M8 thread size, which may not suit all applications.

Setup, Compatibility & Care

Setup:

  1. Choose Location: Select a sturdy mounting surface capable of withstanding tension. This could be a wooden post, a solid wall, or a metal frame.
  2. Drill Hole: Drill an appropriately sized hole for the M8 thread (typically slightly larger than the thread diameter) for the depth required (up to 250mm if fully inserted).
  3. Insert Eyebolt: Screw the eyebolt into the pre-drilled hole. If mounting through a thinner material like sheet metal, pass the bolt through and secure with the provided washer and nut on the other side.
  4. Secure Fastening: Use a wrench to tighten the nut firmly against the mounting surface. For wood, ensure the bolt is screwed in deep enough to be secure. If mounting through a hole, tighten the nut against the washer and the mounting surface.

Compatibility:

  • Thread Size: Compatible with M8 nuts and washers, and M8 threaded holes.
  • Mounting Surfaces: Suitable for wood, concrete (with appropriate wall plugs), brick, and metal.
  • Wire/Rope: Ideal for use with fencing wire, guy ropes, general utility rope, and cables.

Care:

  • Cleaning: Wipe down with a dry or slightly damp cloth to remove dirt and debris. Avoid abrasive cleaners.
  • Inspection: Periodically inspect for signs of excessive wear, rust, or damage, especially if used in harsh conditions.
  • Lubrication: In highly corrosive environments, a light application of grease to the threads *before* installation can aid in future removal, but avoid grease on the eye itself if it will be in contact with rope or wire that needs grip.

Price History

DatePrice
Visit shop