Best current price£68.63from Cycles U.K.
Shopping.co.uk recommended and popular offers
Cycles U.K.£68.63Visit shop Deity Racepoint Aluminium Handlebar 38MM Rise 810MM STEALTH - Cycles UK
Visit shop4 offers from £68.63 - £77.99
View price history by clicking the chart icon.
The Deity Racepoint 810mm Aluminium Handlebar is designed for aggressive Downhill, Enduro, and All-Mountain riders who prioritize steering precision without sacrificing comfort. By utilizing advanced gradient butting technology, this handlebar bridges the gap between the stiffness of a 35mm bore and the vibration-damping compliance typically found in smaller 31.8mm bars, though its generous 810mm width may feel oversized for riders on tight, tree-dense trails.
| Model Part Number | DE26RCPT38ST |
|---|---|
| Brand | Deity |
Yes, the handlebar can be cut using a pipe cutter or a hacksaw with a guide to suit your preferred riding width.
No, this handlebar is specifically designed for a 35mm clamp diameter and will not fit a 31.8mm stem.
The handlebar weighs approximately 330 grams.
Yes, Deity includes cut marks to assist in achieving an accurate and even length during installation.
While it can be used for XC, it is purpose-built for Downhill, Enduro, and All-Mountain riding, meaning it is heavier and stiffer than typical dedicated XC bars.
Clean the clamping surfaces with isopropyl alcohol to remove grease, apply a small amount of assembly paste, and ensure bolts are tightened to the stem manufacturer's recommended torque.
Remove the faceplate, clean the contact areas, ensure there is no debris, and re-torque the bolts in an 'X' pattern to ensure even pressure.
To install, ensure you are using a compatible 35mm bore stem. Apply a thin layer of friction paste if using carbon components nearby, but adhere strictly to the stem manufacturer's torque specifications to avoid crushing the aluminium. To care for the bar, regularly check the clamping bolts for security and inspect for scratches or deep gouges after major crashes, as these can create stress risers. The 810mm width can be trimmed to your preferred length using a hacksaw and a guide, but ensure you clean the edges with a file afterward to prevent sharp burs.
