Ultracrete SCJ Bitumen Cold Joint Sealer and Tack Coat - Black

Ultracrete SCJ is a bitumen cold joint sealer used to prevent water ingress in asphalt joints.

It prevents water ingress, prolongs the life of repairs, is simple to apply, and economical.

It can be used on road surfaces, car parks, airport runways, and other asphalt surfaces.

Apply evenly to the vertical edges and base of the joint with a brush or applicator.

Drying times vary; refer to the product instructions or datasheet for specific details based on weather conditions, but approximately 30 minutes.

It is generally compatible with asphalt. Always check compatibility with the specific materials used in your project.

Wear appropriate personal protective equipment (PPE), including gloves and eye protection, and avoid contact with skin and eyes.

HAPAS (Highway Authorities Product Approval Scheme) approval ensures that the product meets stringent standards.

Ensure the asphalt surface is clean, dry, and free of dust or debris. If needed, use a primer.

Check the temperature and humidity. Allow for longer drying times in cooler or humid conditions. Make sure the applied layer is not too thick.

Ensure the product is properly mixed and at the correct temperature. Use appropriate application tools and techniques, such as a brush or spray.