Best current price£188.84from B&Q
Shopping.co.uk recommended and popular offers
B&Q£188.84Visit shop B&Q - Traffic Hd Clear 2K Polyurethane Wood Floor Lacquer 4.95LSilkmatt
Visit shop1 offer from £188.84
View price history by clicking the chart icon.
Bona Traffic HD is a high-performance, two-component waterborne finish engineered for timber floors in high-traffic commercial or residential areas. It provides a durable, clear silkmatt shield that preserves the natural look of wood, stain, or primer while offering rapid curing times. While it excels in durability and speed, the requirement for a two-component mixing process and precise application techniques may present a learning curve for novice DIYers compared to single-component finishes.
| Model Part Number | WT155346001 |
|---|---|
| Brand | Bona |
It is suitable for most timber floors, but always conduct an adhesion test, especially on exotic wood species or previously treated surfaces.
The product is designed for rapid drying, typically allowing light foot traffic within a few hours, though full cure takes longer.
No, it is a non-yellowing, waterborne formula designed to remain clear.
Once mixed with the hardener, the finish has a limited pot life and should be used promptly as directed by the product instructions.
While it can be used directly on bare wood, using a compatible Bona primer can enhance color tone and improve overall adhesion.
Ensure you are using the correct applicator, maintain a wet edge during application, and avoid overworking the finish.
Ensure the hardener was mixed thoroughly into the base for the recommended time and that the ambient temperature/humidity are within the manufacturer's range.
Do not shake the container vigorously; stir gently. Check application speed and ensure the applicator is saturated enough before spreading.
Before starting, ensure the substrate is free of dust, oil, and wax. Bona Traffic HD can be applied directly over properly prepared bare wood or compatible wood stains and primers. Always perform a test patch to ensure adhesion and color compatibility.
Application requires a steady hand and even strokes to prevent pooling. Clean tools immediately with water after the application is complete. For ongoing maintenance, use neutral, pH-balanced floor cleaners recommended for waterborne finishes to preserve the integrity of the protective layer.
