Sylt Weather Station with Outdoor Sensor, Black - Hama
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Hama Sylt Weather Station is designed for individuals who want a clear, digital overview of their indoor and outdoor environment, including temperature, humidity, time, and a weather forecast. Its key benefit is the automatic time synchronization via DCF radio clock and an easy-to-read, extra-large display. A potential caveat is that reliance on battery power means regular battery replacement is necessary.
All features
| Model Part Number | 222216 |
|---|---|
| Brand | Hama |
Extended Product Information
FAQs
How do I set the time manually if the DCF signal is not received?
Press and hold the 'MODE' button until the time starts flashing. Use the 'UP' and 'DOWN' buttons to adjust hours and minutes, then press 'MODE' again to confirm.
What is the optimal placement for the outdoor sensor?
Place the sensor in a shaded, well-ventilated area, protected from direct rain and prolonged sunlight. Mounting it on an exterior wall or under a sheltered eave is recommended. Avoid placing it too close to heat sources.
How many batteries are needed for the Hama Sylt Weather Station?
The main unit requires 2x AA batteries, and the outdoor sensor also requires 2x AA batteries, for a total of 4x AA batteries.
Can I switch off the DCF radio clock function?
Yes, you can deactivate the DCF radio clock signal. Refer to the unit's manual for the specific button combination, typically involving pressing and holding a specific button while the time display is active.
What temperature and humidity ranges can the station measure?
The indoor unit measures temperature from 0°C to 50°C and humidity from 20% to 95%. The outdoor sensor measures temperature from -20°C to 60°C and humidity from 20% to 95%.
What does the weather forecast feature indicate?
The station displays one of seven forecast symbols based on changes in barometric pressure, suggesting conditions like sunny, cloudy, rainy, or snowy weather. It also shows trend arrows for temperature and humidity.
Troubleshooting
Main unit not displaying outdoor temperature/humidity.
Ensure the outdoor sensor has fresh batteries and is within the 50m range of the main unit. Try resetting both units by removing and reinserting batteries. Ensure there are no significant physical obstructions between the units.
Time is incorrect and not synchronizing.
Verify that the DCF radio clock function is enabled. Ensure the main unit is not placed near sources of interference (e.g., large metal objects, electronic devices). Try manually setting the time zone or deactivating and reactivating the DCF signal.
Display is dim or not working.
Check and replace the batteries in the main unit. Ensure the batteries are inserted correctly with proper polarity.
Outdoor sensor not transmitting signal.
Replace the batteries in the outdoor sensor. Check for any physical damage to the sensor. Ensure it is placed within range of the main unit.
Pros and Cons
Pros
- Accurate timekeeping via DCF radio clock.
- Comprehensive indoor and outdoor environmental monitoring.
- Large, easy-to-read display for quick information access.
- Includes a useful weather forecast function.
- Dual alarm with snooze offers practical daily use.
Cons
- Requires battery replacement for both the main unit and outdoor sensor.
- Outdoor sensor range may be limited in complex environments.
- Weather forecast is symbol-based and not highly detailed.
- Plastic construction might be perceived as less premium by some users.
Setup, Compatibility & Care
Setup:
- Insert batteries into the main unit (receiver) and the outdoor sensor. Ensure correct polarity.
- Place the outdoor sensor in its desired location (e.g., protected outdoor area, unheated room).
- The main unit will automatically search for the outdoor sensor signal. This may take a few minutes.
- The DCF radio clock will automatically search for the time signal. Once received, the time will display correctly. If needed, manual time zone setting or DCF signal deactivation can be accessed via the unit's buttons.
Compatibility:
- The outdoor sensor has a transmission range of up to 50 meters in open areas. Obstructions like walls can reduce this range.
- Requires 2x AA batteries for the main unit and 2x AA batteries for the outdoor sensor.
Care:
- Clean the main unit and outdoor sensor with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Ensure the outdoor sensor is placed in a location protected from direct rain and extreme weather conditions to prolong its lifespan.
- Replace batteries promptly when indicated or when performance degrades.